How Do Forced Air Heaters Work?

Posted by AldoMoore on February 5th, 2015

Forced air heating units are familiar sights in buildings all over the nation. Perhaps, you are a homeowner exploring your options in the same lines. They are energy efficient and the best way to ensure uniform heat in all the rooms of a home. But, if you want to take an informed decision, you should have an understanding of these units.

What does forced air heating mean?

There is no much difference between a forced air heating system and its other variants. This unit just heats the air and distributes it through ducts to all the rooms in a home. The only thing which differentiates one type of unit from the other is the equipment used to produce the heat.

How forced air heaters work

Several parts are involved in heating your home in these units. The first among them is the thermostat. It allows you to set a specific temperature for your home and regulates the heating accordingly. When the temperature goes down below the specified setting, the burner turns on; the opposite happens when the atmospheric heat goes up. Next in line is the burner, the source of heat. The fuel burns inside and the heat gets pushed out. A fan distributes this heated air into the entire home through ducts. A blower ensures the flow of cold air to the heater to be heated up. The bi-products are dumped in the heat exchanger and they are thrown out through a ventilator. It also features an air filter to prevent the building up of dust and other debris on fan and the rest of the unit.

Points to remember

Do the following and prolong the life of your heater.

• Clean the air filters at regular intervals. Negligence here would force the heater to work harder. It will increase your energy bill and shorten the life of the unit. If you are unable to clean them up, you may have to replace them.
•  Do not forget to turn off the power when trying to inspect the heater. It will help you avoid accidental shocks.
• Look for cold spots in your home and do the needful. You can use a thermometer for the purpose. A few foam insulations or weather stripping may be enough to take care of the issue most of the time. Doing this will reduce energy consumption.
• Make sure that you have a programmable thermostat installed in your home. It will help you regulate the temperature in your home as per your requirement.
• Consider the possibility of zoning your home. For this, install motorized dampers. This is generally discouraged because if you switch off a zone, it may lead to excessive back-pressure. This may cause damage to the air handler in the heater.

Do a thorough research on forced air heaters before choosing a particular model. This alone will make sure that you are able to enjoy the warmth they offer for long. When combined with proper maintenance, the unit will stay with you for a lifetime. Further info at Heater Store.

Contact :
Contact Person: Jose C. Calderon
E-mail: JoseC@MegaSuperStoreS.com
Mega Super Stores, Inc
Address: 10679 Westview Pkwy,San Diego, CA 92126
Tel/Fax: 800-568-5450
Website: http://www.heater-store.com/