Things To Demystify Multi-sided Electric Fireplace

Posted by Liam Jasper on October 27th, 2022

Multi-sided electric fireplace is a new type of fireplace that can be used as both an indoor and outdoor fireplace. It has many advantages, such as it does not need any chimney or flue pipe to get rid of the smoke from burning wood logs, which makes it more convenient for people who live in apartments or houses where there are no chimneys. In addition, multi-sided electric fireplaces have a wider range of heat output than traditional fireplaces, so they can provide warm and cozy environment even when you’re away from home.

Multi-sided electric fireplace is also known as multi-directional electric fireplace because it can be turned into different directions. The most common direction is vertical, but other directions include horizontal, diagonal, and even upside down. This means that multi-sided electric fireplace can be placed anywhere in your house or apartment. You don’t have to worry about where to place it since it will look great wherever you put it.

Multi-sided electric fireplace is made up of three parts: the main body, the control panel, and the heating element. The main body is usually made out of stainless steel, aluminum alloy, or cast iron. The heating element is usually made out of copper or nickel. The heating element is connected to the control panel by wires. The control panel is usually made out of plastic or glass.

The heating element heats air inside the main body. When the heating element reaches its maximum temperature, it sends signals to the control panel. The control panel then turns on the fan and starts blowing hot air through the vents. As long as the heating element keeps sending signals to the control panel, the fan will keep running until the heating element cools down.

The heating element is powered by electricity. If you want to use this kind of fireplace indoors, you should install a power outlet near the fireplace. Otherwise, if you want to use this fireplace outdoors, you may need to buy an extension cord with a plug at one end and another socket at the other end.

How to Install Multi-Sided Electric Fireplace?

Installing multi-sided electric fireplace is very easy. All you need to do is follow these steps:

1) First, remove all the furniture around the fireplace area. Make sure that nothing is blocking the path between the fireplace and the wall.

2) Next, measure the distance between the floor and the ceiling. Then mark the center point of the fireplace using tape. If you want to know about multi-sided electric fireplace, then you are at the right place.

3) Remove the outer cover of the fireplace. Use a screwdriver to loosen the screws holding the outer cover together.

4) Take off the outer cover. Now you can see the inner structure of the fireplace.

5) Find the holes on the bottom of the fireplace. Drill two small holes on each side of the fireplace. These holes are called vent holes. They allow the heated air to escape.

6) Put the outer cover back on the fireplace. Screw the screws tightly.

7) Turn on the power supply. Plug the power cord into the wall socket.

8) Place the heating element on top of the main body. Connect the heating element to the control panel.

9) Place the control panel on top of the main unit. Attach the wires from the heating element to the wires coming from the control panel.

10) Close the outer cover.

11) Adjust the thermostat so that the desired temperature is reached.

12) Enjoy!

13) Cleaning Multi-Sided Electric fireplace

Cleaning multi-sided electric fireplace isn’t difficult. Just make sure that you clean the heating element regularly. It could get dirty easily. Also, make sure that you clean any dust particles that might fall onto the heating element.