FIBERGLASS MATTING AGAINST UPSTAND OR FILLET TRIMSPosted by zccyfiberglass on June 15th, 2016 Try to enable enough fiberglass matting to change it to complete at the highest edge of your upstands or D260 Fillet trim. This strengthens it, fiberglass chopped strand mat and stops the chance of driving rain finding a pin hole within the joint between your fiberglass and trim. D260 upstand trim fibreglassedD260 wall trim – Covering flashings can later hide the be a part of between the matting and also the trim after application of the coloured coat. CLEANING TOOLS Brushes and roller sleeves can clearly have to be disposed of once used however consolidation rollers and roller frames etc. will be clean in a very shallow tray of acetone prepared for re-use. Take care for your skin – don't clean your hands or skin in acetone because it strips out the oil in your skin and may cause skin issues. Clean you hands with industrial cleanup wipes instead, therefore me brands are better than others at cleanup resin and coat so you will need to experiment. Like it? Share it! More by this author |