Brother hl-l2300d wireless setup

Posted by Suchi Abram on March 1st, 2020

If your wireless router or access point uses WEP encryption with multiple WEP keys, write down and use only the first WEP key.
You must know your wireless network settings of the WLAN access point/router.

Check and record the current wireless network settings below.

Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID)
Network Key (Password, Security Key or Encryption Key, etc.)
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using more than one WEP KEY, enter the KEY used for the first WEP KEY.

If you own a Brother HL-L2300D printer and wondering how to set it up on WiFi, then don’t panic. Here, we will walk you through a detailed guide on how to perform Brother hl-l2300d wireless setup on Windows and Mac.

If your authentication method is Open System and your encryption mode is None, go to the next step.
If your WLAN access point/router supports WPS, WPS is available appears. To connect your machine using the automatic wireless mode, press Up arrow key. (If you choose No, enter the Network Key you wrote down in the first step.) When Press WPS on rtr appears, press the WPS button on your WLAN access point/router, and then press Up arrow key twice.
The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays Connected. The machine will print your machine's wireless status report. If the connection fails, check the error code on the printed report.
For touchscreen model
Connect the AC power cord to your Brother machine and then connect it to an AC power outlet (electrical socket). Turn on your Brother machine.
Press (Settings) > All Settings > Network > WLAN > Setup Wizard.
When Switch Network interface to wireless? appears, press Yes.
This will start the wireless setup wizard. To cancel, press No.
The machine will search for your network and display a list of available SSIDs.
If a list of SSIDs is displayed, press Up or Down arrow key to display the SSID to which you want to connect, and then press the SSID.
Press OK.
Do one of the following: If you are using an authentication and encryption method that requires a Network Key, enter the Network Key. When you have entered all the characters, press OK and then press Yes to apply your settings.