Multi-Line Lubrication System And Other Lubrication Systems
Posted by Cenlub Systems on December 31st, 2020
In the mechanical industry, lubrication plays a major role without which the machines will start degrading or stop working. Lubrication is like providing water to a plant so almost every machinery starting from a simply sewing machine to plastic molding machines need the help of a lubrication system. For every kind of machinery the lubrication system differs. Like for example, the Multi-Line Lubrication System is mainly for machines like calendaring machines, cement machines, stone crushers, rolling mills, sugar machines, hydro turbines, forging hammers and many more.
In each lubrication system, there is a separate pumping unit which ejects oil or grease from time to time into the machine to keep the machine working and at times most of the work is done automatically. So for every machine the parts of lubrication system differs that is the reason why knowing about every other lubrication system is important. So to help you buy the most suitable lubrication system for your machinery, here is a small list of common lubrication systems:
1. Progressive Lubrication System
If you are falling short on your budget and you still want to buy the best lubrication system, you can always depend upon the progressive lubrication system. It helps in effectively automating and centralizing the lubrication in all machines. It contains a simple mechanism whereby its distributor block enters through the feed lines and reaches to the lube points to dispense the lubricant. The progressive block also contains a visual indicator pin which will confirm you when the lubricant has been dispensed into the lube points. The system can be controlled both manually and using a motor and the system is best used for plants like steel, paper, heavy-duty, printing, textiles, packaging, metal or electronics.
2. Dual Line Lubrication System
This lubrication system can be used in almost the same machinery like Multi-Line Lubrication System. So if your machinery has multiple or a huge number of lubrication points you can always ask for the best quality dual line lubrication system because although it works from a single source it can easily cater to a large number of lubrication points. The system contains two supply lines which are individually connected to the dose feeder inlets and the points of the lubrication are connected with the outlets of these dose feeders. The pump works makes use of the pressure and release created by the reversing valve to feed lubrication to the lubrication points.
Another lubrication system that works on most of machinery where Multi-Line Lubrication Systems are used. The Single Shot Lubrication System is efficient system where a large number of lubrication points can be dispensed with lubricants from a single source. There is no return line so the lubricant is dispensed to be used completely. So now that you know about the various lubrication systems, you can choose the best one for your machinery.
