3 Tell-Tale Signs You Have an Overloaded Electrical Panel

The electrical panel is basically the control room for the electrical system running in your home. It’s the hub, so to speak, so if you have problems with your electrical system, the electrical panel will usually let you know.

 

Here are a few of the common signs that you might have an overloaded Electrical Panel in Lake Cowichan:

 

If you have an overloaded electrical panel in Lake Cowichan, the breakers will trip. Each breaker can only accommodate a certain load. It’s a safety feature because if the load is too much for the breaker, it will automatically shut off or trip to avoid electrical fires or overheating.

 

This can happen occasionally. However, if the breakers trip a lot, it could indicate a problem in your electrical system. Perhaps you are using too many appliances in one room or you are using a lot of appliances that use up more power.

  

Whatever the reason is, you need to have your system and electrical panel in Lake Cowichan checked by a professional electrician. Don’t put it off or it could lead to a fire problem.

  

Check the electrical panel. Does it feel hot? Can you spot burn or black marks around the breakers? This indicates overheating inside the electrical panel in Lake Cowichan. This is an emergency.

Shut off your electrical panel and call an electrician. Your system is on the verge of causing a fire, so it’s best to have your system checked before using it.

 

2. The electrical panel feels hot 

Check the electrical panel. Does it feel hot? Can you spot burn or black marks around the breakers? This indicates overheating inside the electrical panel in Lake Cowichan. This is an emergency. Shut off your electrical panel and call an electrician. Your system is on the verge of causing a fire, so it’s best to have your system checked before using it.

 

This does not happen often but it can happen to older homes. The older the home, the more worn-out the electric panel in Lake Cowichan is. You could be using modern appliances with a load that can no longer be accommodated by the existing panel. In this case, you need to get an electrical upgrade. 

 

Loud buzzing sounds usually indicate a problem with the wiring. It could be overloaded or close to overheating. There could be damage to the breakers as well. 

 

If you see these signs, you should find an electrician to fix the problems.You probably need an electrical panel upgrade, especially if you have an old home.

 

If you are moving into a new home that has been there for decades already, it is also prudent to have it checked by an electrician first to make sure that the electrical system is safe to use. Go around the house and inspect the electrical outlets.

 

Find out if there are burnt marks around the sockets that could indicate overheating. If you spot flickering lights and this happens every time you plug in new appliances, your home’s electrical capabilities might not be sufficient and will need an upgrade.

 

 Roy Stevenson is the author of this article.To know more about Electric Panel in Lake Cowichan Please visit our website: rbelectric.ca