Swing Check Valve Manufacturer in Italy

Posted by Valves Only on January 19th, 2021

Interested to know about valves? below are some of the valves and its uses

Bellow Sealed Globe Valve

Wear and tear in the industrial structures are common and chemical plants are no different. All such leakages and faulty pipelines are investigated with high-end machines and experts. Critical changes are required on the spot to abrupt the leakage as these incidences are enough to strike a hazard. Bellow sealed globe valve manufacturer says these are designed to handle the extreme temperature of the fluid such as oil, air, and chemicals. This can be used to stop the leakage and for creating the seal shut - vacuum. Industries of Nuclear plant, heavy water plant, and Highly hazardous fluids are among the prime users of the Bellow sealed globe valve. You can trust this information because it is directly sourced by the top Bellow Sealed Globe Valve manufacturer in Italy.

Non-rising Stem Gate Valve

The primary difference between rising and Non-rising stem gate valves is the space they take. The non-rising stem gate valve manufacturer makes them in such a way that the stem of the way valve is fully open when moved in the extreme left direction and fully closed if handled moved in the extreme right direction. Non-rising stem gate valves are primarily used in clean liquids and gases.

The Titanium Ball Valve

The titanium ball valve manufacturer takes the guarantee of these valves against oxidation and endurance. Hence, the paper industry, bleaching plants, and condenser tubing, heat exchangers become the primary users of this valve. In these industries, corrosion is likely, and titanium justifies the needs and circumstances.

The Steam Valve

Steam valve manufacturer makes them for reducing the stream pressure generated in the process application. They are normally used at lower pressure. The main functional areas of these are steam-driven turbines in electric power plants. The range of these valves is quite extensive. Nevertheless, food-processing plants, Refineries, and chemical plants are the places where you can see these valves more than often.

The Swing Check Valve

A Swing Check Valve consist of a disk or a flap in the same diameter of the pipe, which hangs down in the path of the flow in the forward direction, the pressure of the flow forces the disk to open and allowing the flow through the valve. If there is a reverse flow it will cause the disk or flip to shut against the seat and stop the flow of the fluid going back down the pipe, in absence of the flow the weight of the flap is responsible for the closure of the valve, however in some case closure may assisted by the use of weighted lever. These valves are used in different applications to protect from back flow. Outlet side of pump, Centrifugal pump, Water pump, HVAC System (Heating, Ventilating and Air Conditioning-Systems) the check valves are installed here to make sure that the coolant is not flushing back down.

Looking for Reliable Swing Check Valve Manufacturer?

Valvesonly Europe is one of the leading Swing Check Valve Manufacturer in Italy with our manufacturing Unit and warehouse in Italy and Germany.

Below is the description of valves available from Valvesonly Europe

Material: WCB, Cast Iron, Ductile Iron, SS304, SS316, 316L, Duplex steel,

Class 150-2500, Pn10-PN25

Ends: SW, BW, Flanged

Visit our website to know more details!!

Contact Us

If you are an industrialist or working for an industry then you should visit valvesonlyeurope.com as they cater to the most extensive range of valves at affordable prices.