Top Features of Wiped Film Evaporators

Posted by ablazeglass on January 22nd, 2021

Wiped Film Evaporators, also known as Thin Film Evaporator is manufactured and supplied by Ablaze Glassworks – one of top glass vessel manufacturers in India. In this blog post, Ablaze Glassworks discusses the top features of its wiped film evaporators along with desined, technical specifications, description and components.

Wiped Film Evaporators by Ablaze Glassworks are designed with the following:

#1) PTFE and Borosilicate 3.3 glass contact parts only

#2) Designed with glass evaporators for visual observation of processes

#3) Magnetic and mechanical seal for leak-free operation

#4) Designed with PTFE Rotating Roller Wiper System

#5) Designed for high vacuum operations

#6) Ensures safe and easy operation

#7) Automated operation

Wiped Film Evaporators by Ablaze Glassworks are designed with the following technical specifications:

The feed capacity of Wiped Film Evaporators is O.1 L/hr tc 50 L/hr. It operates in up to 200⁰ C - 250⁰ C. The operating pressure of Wiped Film Evaporators is 0.01 bar to 1 bar. Wiped Film Evaporators can be further designed with centrifugal pump / gear pump / dosing pump. The power capacity of Wiped Film Evaporators by Ablaze Glassworks ranges around 230/400 V AC, 50Hz.

Wiped Film Evaporators by Ablaze Glassworks are designed with the following processes:

Liquid feed solution is added to V2 from V1 by pump P1. At vessel V2 feed is added into wiped film evaporator E. The Liquid Distributor Disk of the Wiped Film Evaporator spreads the liquid on evaporation surface. Wipers of Wiped Film Evaporator maintain uniform liquid and evaporation. Concentrated solute liquid hereafter collected in V4 at the bottom of evaporator. From here, the solvent vapor rises up in evaporation chamber of the Wiped Film Evaporator and Vapor gets condensed and cooled in condenser C.

Wiped Film Evaporators by Ablaze Glassworks are designed with the following components:

Components available with Wiped Film Evaporators by Ablaze Glassworks are Mechanical Seal, Evaporation Chamber, Stirrer Shar for Wiper, Heating Packet, Liquid Inlet, Stirrer Shaft Support, Liquid Distributor Disk, Conical Bottom, Roller Wiper System and Vapor Outlet.

For more information about Ablaze Glassworks, feel free to connect with Ablaze Glassworks who is one of the best glass valves manufacturers originating from Gujarat, India.