IP67 20W LED DRIVERPosted by Lily Wang on February 1st, 2021 20W LED DRIVER
MODEL
|
BG-20-12
|
BG-20-24
|
BG-20-36
|
BG-20-48
|
OUTPUT
|
DC voltage
|
12V
|
24V
|
36V
|
48V
|
Rated current
|
1.67A
|
0.84A
|
0.56A
|
0.42A
|
Current range
|
0 ~ 1.67A
|
0 ~ 0.84A
|
0 ~ 0.56A
|
0 ~ 0.42A
|
Rated power
|
20W
|
20.2W
|
20.2W
|
20.2W
|
Ripple & noise
|
100mVp-p
|
120mVp-p
|
120mVp-p
|
150mVp-p
|
Setup,rise,hold time
|
500ms, 20ms,20ms/230VAC
|
INPUT
|
Voltage range
|
85~264VAC 120~370VDC
|
Frequency range
|
47 ~ 63Hz
|
Efficiency
|
80%
|
81%
|
81%
|
83%
|
Ac current
|
0.55A/115VAC 0.35A/230VAC
|
Inrush current
|
Cold start 30A
|
Leakage current
|
<0.5mA/240VAC
|
PROTECTION
|
Overload
|
115 ~ 150% rated output power
|
Protection type : Constant current limiting, recovers automatically after fault condition is removed
|
Over voltage
|
5.8~6.8V
|
28~32V
|
28~32V
|
55~64V
|
Protection type :Shut off
|
ENVIRONMENT
|
Working temp,humidity
|
-20℃ ~ +60℃,20% ~ 90% RH non-condensing
|
Storage temp,humidity
|
-20℃ ~ +85℃,10% ~ 95% RH non-condensing
|
Withstand vibration
|
10 ~ 500Hz, 2G 10min/1cycle,period for 60min. each axes
|
SAFETY & EMC
|
Safety standard
|
Design refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
|
Withstand voltage
|
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
|
Isolation resistance
|
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
|
EMC standard
|
EN55015,EN55022,EN55024,EN61000-3-2,EN61000-3-3,EN61547 approved
|
OTHERS
|
MTBF
|
500K hrs
|
Dimension
|
182*29*30mm (L*W*H)
|
NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
|
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
|
3. Tolerance : includes set up tolerance, line regulation and load regulation.
|
|
|
Contact us for more information.
About the AuthorLily WangJoined: February 1st, 2021 Articles Posted: 2 More by this author
|
|