How to Fix HP Printer Code 49 Error

Posted by Veronica Watts on April 12th, 2021

HP printer code 49 error can be dreadful to an HP printer user. It is a common error that an HP printer user may encounter anytime. This error is generally caused by software problems, firmware defects, and communication issues. In this article, we have mentioned the ways to fix the HP printer code 49 error. It is time to know how to troubleshoot the HP printer code 49 error in a few simple ways.

What Happens When 49 Error Occurs?

Generally, HP printer error code 49 is a technical error that does not let your printer process the files properly. Sometimes, the printer cannot interpret the files. One can resolve the issue by following the steps mentioned below.

Click on "Cancel Job" to Clear the Memory

Hit the "Cancel Job" button on the printer. This will assist you in cleaning your printer. Now, you need to turn off the power button, then wait for some minutes, and then turn it on to view whether your HP printer error code 49 is gone or not.

Print with Different Software

Some printing applications may not be compatible with your HP printer. When the compatibility does not meet the requirements, your HP printer may behave unexpectedly and show the error code 49. Find compatible software for your HP printer. Take the printing test using another application. If it works properly and causes your HP printer not to show an error message, use the same software for your HP printer.

Opt for the Power-Cycle Process

It is the most common to all HP printer users. If you use an HP printer, you need to know about the power-cycle process. This can prove important if you want to resolve the issue of HP printer error code 49. Disconnect the power chords and connections you have attached to your HP printer and restart it after a few minutes. It may fix the problem. It is a simple but effective solution.

Remove DIMMs from Your HP Printer

First and foremost, you need to turn off your HP printer and remove all the DIMMs and all the third-party DIMMs from your HP printer. When you do so, this will remove all printing memories. You need to keep only firmware DIMMs. Remove the EIO devices before you turn on your printer. It is recommended to install all the DIMMs and EIO devices while your printer is off. Now, switch on the power button and start printing. Doing so will remove the error code 49 on the HP printer.

Remove the Printer's Hard Drive

The hard drive does the job of storing memory. When there are some errors on the Hard drive, this may take the form of an error and appear on the screen. To fix the problem, you can remove the printer's hard drive and re-install another hard drive to view if the problem exists with the printer's hard drive.

Remove the JetDirect-Network Card

Turn off your HP printer, remove the network card. Now you need to turn on the printer again. If there is any fault with the Network Card, the issue will be resolved.

Perform Factory Reset

Performing factory reset does an excellent job of removing all the corrupt files and completely deletes their residues. One can perform a factory reset and fix the error code 49 quickly.

Conclusion
HP printers are widely appreciated for providing excellent printing quality. Fixing error codes on HP printers may be quite annoying. One of these is error code 49. It may annoy an HP printer user. We have suggested ways to fix the error code 49. We hope you find the solutions useful.

Source:https://softwarecolumn.com/