Asbestos Removal: Protecting From Hazardous Fibers

Posted by Jim on May 22nd, 2021

Asbestos removal must be done carefully, because it may not always be safe. Although it used to be made from asbestos ore, which was very dangerous because it was so friable and easy to manipulate, today it is made from chrysotile, which is much more resistant and also less friable. As a result, there are fewer chances that asbestos will be released into the environment in large quantities.

There are certain precautions that should be taken when dealing with asbestos removal or asbestos abatement. First of all, it is important to remember that the process involves asbestos abatement and not just removal. Asbestos abatement is the process which directly eliminates the hazardous fibers from your property. Professional asbestos abatement services use specialized equipment and always follow strict safety protocols during asbestos abatement to safeguard your health and the safety of other people.

Asbestos removal cannot begin without the detection of all sources of asbestos in your home, including spaces between walls and ceiling boards, interior cracks in tiles and insulation, attic insulation, ceilings, sheet rock and any visible insulation. Any materials which could contain or are contaminated by asbestos are removed and discarded. Vacuuming is often the first step in an asbestos removal process. Special vacuums with HEPA filters and appropriate attachments are available. All materials are removed and properly disposed of, including any material containing non-friable asbestos materials.

Asbestos abatement is done in two steps; the first is the removal process. Essex Asbestos Removal experts make sure that all possible asbestos removal procedures are followed, including the proper disposal of materials containing asbestos. Special attention is given to areas where asbestos contamination has been detected, including insulation, roofing, ceilings, sheet rock, pipes, electrical wiring, cabinets, faucets, flooring, doors, cabinets, paint, textiles, insulation, ceiling tiles, insulation board, basement walls, water pipes, vents, attics, and crawlspaces. Once all potential asbestos removal sites have been identified and have been evacuated, the next step in the process is to seal and repair all contaminated areas. Sealing involves a variety of steps that include cleaning and removing any present asbestos contamination, applying a borate-based primer, sanding and painting, sealing with polyurethane, and finally replacement of any damaged, exposed, or missing asbestos materials.

In many instances, Asbestos Company Essex specialize in materials that have been severely damaged or have obvious signs of degradation. This may include roofing shingles, insulation, plaster, and drywall, amongst other items. It is important to consider that some asbestos removal processes may cause increased levels of danger in certain areas or have detrimental effects on the environment, such as the destruction of surrounding vegetation or increased risk of injury or contamination to humans who may be exposed to the materials.

When hiring an Essex Asbestos Removal company, it is essential to ensure that all hazardous materials are properly and adequately prepared for removal. This will include preparation of the site, removal, packaging, and disposal. It is also important to ensure that all employees are aware of the hazardous materials and how to safely handle, package, and dispose of them in accordance with local, state, and federal safety and environmental regulations. If asbestos removal is being performed in a residential area, it is especially important to work with a company that already has experience in dealing with this type of project, so that the hazard of exposure to asbestos fibers can be significantly reduced.

Any asbestos removal procedure should include the use of protective gear. Asbestos materials can contain asbestos fibers that are small enough not to be seen by the naked eye, but they can easily contaminate surrounding surfaces and make them uninhabitable. The most common type of asbestos removal gear includes gloves and masks. Gloves are worn during the actual procedure in order to prevent inhaling the fibers and to minimize the risk of contamination. In addition to wearing gloves and masks, breathing in asbestos particles can cause severe respiratory problems such as asbestosis and lung cancer.

As a business owner or manager, you have the responsibility to make sure that asbestos removal procedures comply with all federal and state regulations. It is also your responsibility to provide the workers that you hire with proper protection and safety equipment that will allow them to safely remove the asbestos materials in a manner that does not expose them to fibers that could prove to be dangerous. For this reason, it is important to contract a professional asbestos abatement firm to safely remove your asbestos materials and remove them in a manner that does not expose the workers or other people to the hazardous fibers. You may want to check with your local Better Business Bureau to see if there have been any complaints filed against any company that you are considering for this type of work. If you do feel comfortable about the company you have decided to hire, you should go ahead and let them know everything about the asbestos removal project so they can do their best job and get the job done correctly.