Five Top Furnace Issues and Easy Fixes

Posted by Terrazas on June 16th, 2021

Has your heating system quit working? These top 5 furnace issues and their easy options may help to get it working.

Having trouble with your heating system? You're not alone. Fortunately, lots of problems have simple Do It Yourself repairs. The initial step: Examine whether your A/C system has power. You do not desire to have a service tech pertained to your home just to flip a switch at the breaker box. If power isn't the problem, check other possible glitches prior to calling for service.

# 1 ISSUE: Thermostat isn't working.

MOST LIKELY CULPRIT: If your heat isn't beginning at all, attempt altering the batteries in the thermostat, if it has batteries. While you're at it, give the thermostat a good dusting inside with a little paintbrush.

You can likewise attempt to reboot it. With the thermostat set to Heat, turn the temperature level to about 60º. Then, turn the breaker turn off for 30 seconds and turn it back on Still absolutely nothing? Call in an expert.

# 2 ISSUE: System not turning on.

MOST LIKELY PERPETRATOR: Inspect the emergency situation shutoff switch for the furnace. It might be at the entryway to the heater closet, at the top of the basement stairs, or on the heater. It might have a red switch plate. if someone changed it off, the heater won't work.

# 3 ISSUE: Filthy filter

LIKELY CULPRIT: Not switching out an old filter can cause a host of problems, not to point out increasing your energy bill. To ensure your heater does not work overtime, alter your filter each to two months. Here's how: Switch off your heating system, find the filter, remove the old one (and keep in mind of the size), change it and turn the heater back on.

# 4 PROBLEM: Heating system isn't firing up

MOST LIKELY OFFENDER: Does your heating system click as though it's about to turn furnace service on, but then go silent and never begin? If you've examined the power, checked the thermostat and changed the filter, the pilot light or the ignition sensing unit is most likely the problem. To fix it, start by turning off the gas to your furnace. Then get rid of the front panel and find the igniter or ignition sensor, which is usually near the burners. Snap a picture of the sensor to advise you of how it's connected and then get rid of the ignition sensor. Rub it with steel wool to eliminate residue, bewaring to not damage it. Then put it back exactly as you found it and change the panel prior to turning the gas back on. If you have any doubt about this job, play it safe and contact the pros.

# 5 PROBLEM: Heating system keeps tripping the breaker

LIKELY CULPRIT: If your heater keeps tripping the breaker or blowing the fuse when the heat begins, it's more than likely an electrical concern. To keep you and your household safe, employ the pros to identify the cause.

While many typical furnace issues can be fixed without contacting the professionals, it is essential to have your heater expertly serviced as soon as a year, especially if you're not comfortable carrying out a few of the necessary upkeep tasks yourself.