5 Places to Check Before Contacting an Expert When Your Furnace Isn't Working

Posted by Carl on June 22nd, 2021

The last thing you wish to be handling in the depths of winter is an emergency situation furnace repair work. There are some typical reasons that a heater may have stopped running, however without a correct examination by a licensed Gas Fitter with experience and specialized tools, it can be hard to diagnose by yourself.

In our experience, there are 5 main points to check before you call the professionals in.

# 1: Ensure your heater is getting power.

This may appear like sound judgment but sometimes a simple answer is the best. Inspect your home's circuit box for any breaker that might have been tripped. If this is the case and it keeps happening, it may indicate a bigger problem with your electrical system. Also inspect that the heater's power switch has actually not been changed OFF by accident, it must be mounted on the side of the heating system case and will frequently appear like a regular light switch. Last but not least, there's a switch beneath a panel covering the blower motor on your heater, if this panel is not properly attached it will not completely depress a push-in power switch.

# 2: Examine the thermostat.

Another easy solution that can in some cases be overlooked in the panic of a freezing cold home is a malfunctioning thermostat. The control center of your furnace can sometimes be accidentally changed away from the 'heat' setting, or switched off entirely. If the thermostat screen is totally blank then it might be as easy as changing old batteries for new ones. Attempt opening up the thermostat and thoroughly blow on the interior to eliminate any possible dust or particles, and ensure that the wires all all still strongly linked. Check out your handbook to help troubleshoot your thermostat, if you have actually lost your handbook you can typically discover a copy by searching for your furnace make and design on the maker's website.

# 3: Inspect the air consumption

Depending on where your heating system is venting from, in some cases leaves, insects and other debris can get lodged and block the air consumption and exhaust. If this is the case and the blockage is not quickly removed then you'll require to contact a licensed professional to come take an appearance.

# 4: Inspect your filters

If the furnace is fired up but not working as well as it needs to be, this might indicate two possible problems-- the very first being that your air filters need to be changed. Filters are designed to trap particles in the air and the older they get the more blocked they become. For a lot of property heating unit it's suggested that you switch your heater air filters a minimum of twice a year, when in the spring prior to you change on your a/c system and once before you change on your heating system in the fall. Some furnaces need that you change the filters every 3 months, so you'll wish to consult your heating system's manual initially.

# 5: Check the ductwork

The second factor you might not be getting as much heat from your furnace as you should is your ducts. Have a look at the ones around your house to ensure that they're not obstructed, and that their vents are fully opened. Ensure that furnishings or family products such as curtains or carpets are not blocking the air flow. If all your ducts are open however your house is still chilly, it might be a problem with dripping ducts. If you can access some areas of ductwork and notice spaces between them you can seal it with a duct particular tape, but you might require to consult a heating system repair service if you are unable to access them.

Having a robust heater in your house is a requirement in our cold environment, however it can likewise threaten if its not working properly. There are numerous safety devices set up in heating systems for your defense, however if they fail then the scenario can deteriorate rapidly. If you ever think there may be a security problem such as the smell of gas, or flames and smoke coming from the heating system, turn it off instantly utilizing the heating system switch (looks like a light switch within 5ft of the heating system) or the furnace breaker at the fuse panel box.

Keeping your furnace effective and reputable by inspecting it yearly is an easy action towards avoiding this situation. Much like your car, your furnace needs routine upkeep and care to guarantee it reaches its complete ability and lifespan. If your heater keeps needing new parts or service calls, it may be time to investigate the very best heating system for your house and choose furnace installation calgary one that that will correctly heat your house and last for years to come.