NSF O-rings

Posted by PandaGeneral on September 22nd, 2021

O-RINGS AND INDUSTRIAL O-  RINGS ACCESSORIES

American & Metric O-RINGS in a wide range of materials and sizes, Size Range From: 1/32″ to 26″ I.D. O-Rings and Industrial O-Rings Accessories: Measuring Cone & Tape, Sizing Charts, Lubricants, Picks. O-Ring materials include: Nitrile, Buna-N, Viton® , FKM , Aflas®, Silicone, PTFE, molded PTFE o-rings, FEP encapsulated FKM, EPDM, Neoprene, Silicone o-ring, 4 Lobe Q-Rings, E.P.R, Kalrez.

AFLAS O-RINGS

AFLAS O-RINGS DESCRIPTION

Aflas® material is an elastomeric based fluororubber, a copolymer of tetrafluoroethylene and propylene. This elastomer offers excellent chemical resistance qualities, with serviceability in the temperatures up to 550 degrees F depending on environment. Services where Aflas might be applicable include inorganic acids, alkalis, high temperature steam, polar solvents, organic bases, hydrocarbon oils, amines and amine corrosion inhibitor systems, and hydrogen sulfide bearing fluids.

O-Rings Properties:

Excellent heat resistance with continuous service temperature capability of 450°F, chemical resistance including resistance to strong acids and bases, high electrical resistivity, excellent oil resistance. Aflas® is a copolymer of TFE and Propolene, an elastomeric based fluororubber.

O-Rings Temperature Range:

-25 F to +450 F+

AFLAS O-Rings are Not Recommended for :

AFLAS O-Rings are highly resistant to a wide range of chemicals but are not recommended to be used with Ketones (MEK), Auto/Aircraft Brake Fluids, Acetone, Skydrol, Ethyl Acetate, Low Molecular Esters and Ethers.

Uses

norganic acids, alkalis, high temperature steam, polar solvents, organic bases, hydrocarbon oils, amines and amine corrosion inhibitor systems, and hydrogen sulfide bearing fluids Viton® is a registered trademark of DuPont Performance Elastomers. All rights reserved.
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.