Stripping a hardwood floor is not easy.

Posted by sablage-de-plancher on May 23rd, 2022

Floor varnishes retain the wood\'s original textures and hues while also imparting a pleasing gloss and finish. However, it is typical for your floor finish to exhibit signs of wear and tear over time, as floors are subjected to frequent movement, which can cause scuffs and scratches. In fact, with a little work and elbow grease, a hardwood floor may be readily re-stained.

Homeowners may restore their floors using a variety of techniques. If you\'re ready to tackle this project on your own and need step-by-step instruction, look no further. Sablage de plancher Piedmont provides sablage de plancher bois franc and sablage de plancher sans poussière. Everything you\'ll need to strip and refinish your flooring is right here!

1. Apply a paint stripper

The first step in stripping your hardwood floors is to remove the old varnish with a paint remover. Use a liquid remover instead of paint if your floor has been painted for any reason. Because the floor is porous and susceptible to saturation, apply it with a brush rather than putting the stripper straight on it.

A spray stripper, which comes in the shape of an aerosol can and can be sprayed straight to the floor surface, is a viable solution. It\'s worth noting that homeowners should only use gel strippers if they want to remove both varnish and paint, as gel strippers may remove many coats.

1. Remove the varnish and scrub the floor.

The next phase in the stripping process is to remove the varnish from the floor\'s surface. Because of the paint remover used before, the varnish will have split from the floor\'s surface and will be quite easy to scrape off. You have two options for scraping the varnish: a chemical-resistant scraper or a moist mop.

If you\'re going to use a mop to remove the stripper, be sure it\'s not drenched. Regardless of whatever approach you use, be sure to follow the steps thoroughly and vacuum the floor as soon as possible.

1. Sand the floor

Vacuum the dust formed by the sander after it has been sanded. Once the floor is clean, sand it again with fine sandpaper to smooth it out before applying the finishing touches. Ensure that no varnish remains on the hardwood floor\'s surface.

If any traces of varnish remain, they can be removed with a paint stripper, which heats the varnish to destroy it. Then, using the paint scraper discussed earlier, scrape the varnish from the floor.

Sablage de plancher Piedmont and sablage de plancher Lachute offers service like sablage de plancher sans poussière which will make your home look elegant and good.