BIM for MEP coordination service by Advantage Engineering

Posted by John on June 20th, 2016

By Advantage Engineering                                                                                                                         Tel: (518) 320-2501

Problems using design coordination, such as time ingestion and ineffectiveness related to the present 2D paper-based process, are many of the top concerns of Mechanical Shop Drawings contractor, since late conflict correction raises the potential for errors inside field. In order to cope with this issue, there are actually an increasing number involving Architecture, Engineering and Construction (AEC) businesses utilizing building information models (BIM) of their coordination and clash prognosis processes, which according for you to practitioners, allows for greater coordination and fewer discipline problems. Leite et al. compared types of clashes identified in a very manual Coordination Drawing process (overlay of 2D drawings with a light table by frames of subcontractors) and by way of automatic clash detection by using a Building Information Model (BIM). The automatic clash prognosis identified several clashes which are missed by the subcontractors, who had been performing this task physically. Also, the manual clash detection identified clashes that may not possibly be found with the automatic clash detection software package, since one of your clashing objects (e. h. cable trays) was not modeled inside BIM. This study in addition included site observations involving field detected clashes, several of which were not discovered in either manual as well as automatic processes. Leite noted that this combination of clashes discovered in coordination meetings, those people automatically detected, as well as those identified inside field enable identification of objects that should be modeled in order to capture the most important possible number of clashes. This paper was tied to the comparison of varieties of clashes identified in every one of the three methods during a unique project. Although their results is not generalized, they still provide insight towards the call to identify what needs to get modeled in a BIM for mep coordination prior to start of the coordination course of action.

Concrete reinforcing is just about the many items requiring specialized shop drawings to the fabrication of the product. Concrete reinforcing is custom-fabricated via 60-foot-long reinforcing bars. Your reinforcing bars are lower to length and bias to specific configurations. The shop drawing plus the accompanying “cut sheet” lists the quantity, sizes, lengths, and shapes in the reinforcing bar. This information can be provided for review with the structural engineer in order that sufficient reinforcing is staying supplied; fabrication of the bar with the supplier’s shop; an inventory list to the contractor, upon delivery the typical project has a huge number of pieces of reinforcing steel that should be organized for storage along with installation; and placement with the ironworker. The Concrete Reinforcing Steel Institute (CRSI) has changed standard symbols, graphics, and formats for look drawings and cut sheets that generally are widely-used by reinforcing steel fabricators. Every single fabricator has particular fashion for shop drawings along with cut sheets, depending for the draftspeople and Computer-aided design and style systems. Examples of software package used are Advance Tangible, AutoCAD, MicroStation, ProConcrete along with Tekla Structures.

For more information, or to hire experienced mep cad drawings company, contact us here àAdvantage Engineering or by Tel: (518) 320-2501.