Make your own beaded bracelet using wholesale beads

Posted by Umair on July 3rd, 2016

Hello girls!

Today I bring to you an exciting and enjoyable tutorial about making your own bracelet using wholesale beads. If you have just started working with jewelry supplies in crafting jewelry, then it is best that you start with my tutorial.

Here I enlighten you of a comprehensive guide of incorporating each material to make your charming product. Working with these findings will gain you experience that will be counted for future projects.

It is important that you know you need to have a strong grip with the fundamentals of jewelry making and these are the materials basically used in nearly every project, so get familiar with them and learn to utilize them correctly and professionally.

Let us now start with the supplies you require for this project. Make sure you have them all ready and at hand to work. If you are a little girl, use the sharp end materials under adult supervision. Focus and follow each step carefully, you do not want to frustrate yourself in the middle of work running into confusion.

Things you need:

• Wholesale beads
• Needle-nose pliers
• Cutters
• Chain
• Jewelry findings (metal or magnetic)
• Jump rings
• Stringing wire

Step 1: First and foremost, grab your chain and measure it with respect to your wrist width. Get a rough measure just above your actual wrist size. Do not settle for your actual size because sometimes you have to make adjustments in the end. My measure was about 6 inches. Then, cut a wire piece about 4 inches, because a longer length will be required in the end for extra room.

Step 2: Now cover the piece of wire around the tip of your pliers. Do not just wrap it all, leave some space at the finishing point to work in the end.

Step 3: Open the loop partially and fix one end of your chain in it. In order to close the loop you need to twist the piece of wire that is in excess around the bottom. Trim off the pieces of wire in excess. You are getting closer to the design of your wholesale beads bracelet.

Step 4: Start adding the wholesale beads to your wire piece. I would suggest if you go with 10 beads as a start, but you can add as many more or less you wish.

    Step 5: Next up, cut the chain you have from the middle opposite the strand of beads. Now put a jump ring to one end and add another jump ring with a finding to the other end.

You are all done with your beaded bracelet. Doesn’t it look dazzling? I am sure you love it and enjoyed it all along. Keep practicing these tutorials, especially the utilization of jewelry findings. Stack up and make some for your friends and family. It shall carry the love and charm you have for the ones that matter to you. It could also be the perfect gift for one of your friends!