How can uniform beam 532nm green line laser module work continuously?
Posted by berlinsummer on January 10th, 2024
Different from any formal manual line drawing work, under constant technical innovation of 532nm green DPSS laser tech, laser tech engineers are getting the great chance to make use of a highly bright beam emitting tool of a 532nm green line laser alignment. It is an industrial stabilized line measuring tool. Within wide range work distance and multiple lighting occasions etc, only if it gets proper installation onto any other machine or device, this laser line generator brings users good direction, long lasting and high precision green reference line projection onto various working surfaces constantly.
Comparing with a simple manual line drawing tool, the real experience of a 532nm green line laser module is getting even better performance in real line measuring work. It applies the most formally used 532nm green DPSS laser system within 5mW to 100mW. Owing to its low laser beam divergence of less than 1mrad and special TEm00 laser beam mode, even though it is pointing at quite long work distance, this laser line generator still gets ultra fine and straight green line indication as expected. Any time visible laser light is pointing under sunlight, human eyes cannot capture it at all. As a result, unless it is pointing under such working occasion, the selection of a high power laser device up to 50mW to 100mW still makes ultra fine line indication as long as 25 meters and high lighting occasions.
On the basis of a qualified glass coated lens within wide fan angles of 10 to 110 degree, without any serious relying on any manual labor force input, this 532nm green line laser module should only be selected with correct output power and optic lens fan angle. It brings users quite satisfied line positioning results for multiple raw material surfaces, which also makes good job for guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, optical instrument and spectrum analysis etc.
Under operation with an external AC/DC adapter, not spending extra time on alkaline battery power source change, this Gaussian beam 532nm green line laser module makes constant output power and electric current supply. Users also gets no worrying about laser tube burning out or damage for both of long lasting and long distance. Once this industrial alignment laser gets proper adjustment of both laser beam focus and line indicating direction, it gets increasing fineness and brightness line projection at greater distance and higher lighting etc. For the most important of all, according to high attention to thermal energy hurt to eyes and correct wearing of laser safety glasses, it always brings users the most secured measurement for all working occasions perfectly.
