Battery-Powered-Tools, How to Get the Most From Them

Posted by muthuradhi on November 23rd, 2016

They contain gelled acid that was gelled by adding silica gel, making like a battery acid jelly. If you have the space and especially the ventilation, the valves actually do help out on battery life. But ventilation is extremely important. However they have to be charged at a slower rate to prevent excess gas from destroying the cells. Usually, solar systems charge relatively slow, so this isn't really an issue, but if you have a aux. generator on your system, you have to limit the current. Most of the better made inverters handle this without a problem. If they are overcharges they will die quick.

EZ Battery Reconditioning 

AGM (Absorbed Glass Mat) batteries are similar to the gelled batteries but they also have fiberglass mat between the plates of the batter, which is then filled with gel. These batteries are the premier choice if you have any concerns about spilling of battery acid. While spills can still happen with AGM batteries, because of the viscosity of the gell, it takes a little more than just a hole in the battery to come in contact with you or the floor.The main difference in deep-cycle batteries is thicker plates. The thicker plates allow the deep-cycle battery to be discharged down as much as 80% over and over again. The main difference between a TRUE deep-cycle and other wannabes is the presence of solid lead plates, not sponge. Thicker plates mean longer life. The battery with the thickest plates will last the longestA battery cycle is one complete discharge and recharge cycle. Usually its considered to be discharging from 100% (fully charged) to 20% and then back to 100%. How deep a battery is discharged directly affects its life span. A battery that is discharged to only 50% capacity every day will last twice as long as a battery that is drained to 10 or 20% every day.

 http://binarymetabot.com/ez-battery-reconditioning-program-review/