Overview of Cylinder Block Inspection Equipment & Engine MLA Assembly Line

Posted by Ji-Yeon, Park on February 15th, 2017

Cylinder Block Inspection Equipment

This equipment is a core part car auto inspection equipment is the engine block. After the precision machining of engine blocks and CYLINDER BORE and CRANK BORE diameter measurement precision machining defects and acceptance of products by product type and automatically tries to determine the failure rate to minimize processing line process is a precision instrument. The configuration of this equipment products LOADING, diameter measurement, UNLOADING, NG / OK as is the automatic classification. In addition, SPC PROGRAM for all manufactured products that automatically runs up to the DATA management is the precision automatic.

Measurement Items

• Bore Diameter
• Bore Roundness
• Bore Cylindericity

Equipment Specification

• Measuring Accuracy : ≤1㎛
• Cycle Time : 50 sec/piece
• Repeatability : ≤1㎛
• Load/unloading : OK parts automatic transfer NG parts separately loaded
• SPC program: Measurement data save & control management

ENGINE MLA Assembly Line

MLA assembly line is applied to the engine head line and automatically measured camshaft and the head depth. After valve body classification according to the results of the sum of the executed by the two measures, valve body is assembled into an engine head in the line. VALVE BODY assembled by rating the measured accurately confirmed the results of the automatic meter is assembled. Final acceptance and rejection is determined by the MLA automatic assembly line. Measures identified in the assembly process and the cam shaft measurement and cylinder head depth distance measure, MLA assembled gap measure by the production manager precise measurements made?? Automatically to the SPC data Management & MLA automated assembly line. 

MLA assembly line configuration

• CAM SHAFT automatic measuring equipment
• HEAD depth measuring equipment
• VALVE BODY manual assembly line
• VALVE BODY assembling classification
• VALVE stocker& MLA selector
• Selective transport conveyor
• CAM CAP automatic assembly
• CAM CAP bolt nut runner assembly
• MLA gap automatic measuring equipment
• MLA NG part decomposion & reassembly process conveyor
• Automatic transport conveyor part
• Cycle Time: 50 sec/piece
• SPC program: Measurement data save & control management

Are you looking for brake rotor inspection supplier in Korea? Kukil Mechatronics Co., Ltd leading company offers mechatronics engineering in Korea. The products manufactured by Kukil Mechatronics are Automatic measuring machines, Automobile - engine part, steering parts, mission part, braking part, Standard gauge, NDT Inspection and so on.