Inline and Static, two products of great importance

Posted by Christian Silmaro on March 24th, 2017

The Static Mixers are considered to be that engineering products that are used for mixing the fluid materials. Generally, the products that are mixed with the product are liquids. Furthermore, it is also used for mixing up disperse gas into liquid, gas streams or blend up immiscible liquids. 

The energy that is needed for mixing derives from the loss of the pressure as a flaw in fluids by the product.

The two common design of a static mixer is plate-type as well as squared housing or cylinder type. The sizes of the mixer vary from 6mm to 6meters diameter. The typical materials that are used for manufacturing the mixer are stainless steel, Teflon, PVC, PVDF, polypropylene, polyacetal and CPVC.

Why use Inline Mixer?

There is an importance of Inline Mixer in the industries that are related to the engineering fields. It is used for smoothing the progress of the heat and transfer. Techniques like reunification as well as gashing help this particular device to turn into unique mixing equipment. It is able to provide a process that is free from all interruption. In the mixer, the fluids rapidly flow either from anti-clockwise or clockwise direction in order to provide consistency in the quality of the product.

All the parts are attached with skill so that the internal pressure remains intact. The professionals made the internal parts which help in an ideal mixing as well as improve the quality of the product through adding good results. Depending on the needs of the customers, there is a wide range of products, so choose the suitable one for you. The products are preferred to felicitate the process of heat transfer, mass transfer, and reaction engineering. The efficiency of the product depends on the capability to clean, the degree of mixing needed, appropriateness of the scale-up, share rate, pressure fall, heat-transmission, residence time as well as hold-up volume.

Salient characteristic of the mixer:

• Abolish agglomerates
• Easy maintenance
• Less pressure consumption
• No-bypassing
• Lower hear strength
• Low investment
• Systematized space requirement
• Lower pressure drop
• Self-cleaning

The best quality raw materials are used while manufacturing the products. It is for this, the products last a long time without any damage. There are primarily three factors that one needs to consider while manufacturing the best products and these are a reasonable price, timely delivery as well as quality designs. If you like to get all these qualities in your products then choose a good manufacturer and then based on your requirements buy it.