This should flatten your bar.
Posted by Clover on March 29th, 2017
To the north of you will be a small area with fencing on 3 sides and a lever as a central viewpoint.Pull the lever, and your jig cart and bar should move on to the next step, the press. You will need to go upstairs and repair the pipes, however. Go up the ladder stairs near the Schematics crate, and look for a large Junction box. Open it. You will see an interface with 3 pipes on the right and 6 Pipe openings on the left. To4rsgold.com connect the pipe junctions, simply click on one pipe section and then click the section to which you want to connect it to. Set up your pipes like this :The Elemental Workshop II - Set up your pipes like thisOnce they are connected in the proper way, go back downstairs and pull the lever that is just next to three small pipes.
This should flatten your bar. Now, go back to the mine cart controls and pull the lever once. It should now move on in front of a water tank.The Elemental Workshop II - PipeYou will need to repair the pipes before proceeding. Search all crates (Upper and lower sections of the secondary workshop. There are some crates under the stairs too, and the location is random for everyone) until you find a Pipe and then go to Craftingthe upper second section workshop, where the Junction box is.The Elemental Workshop II - PipeGo up north until you see some pipes. One should have a hole in it. Use your pipe on that to fix it.
Go back downstairs.The Elemental Workshop II - Now goback downstairsOpen the door by pulling the lever, and then operate the Corkscrew lever. This should place some railings under your cart. Operate the Corkscrew device once more, and your bar and cart should be place inside the water tank. Close the door with the lever and head to https://www.youtube.com/watch?v=KQev0Upsx6gthe Western water valve. The water should flood the tank and cool down your elemental bar a bit. It will now be Blue. Now you have to drain the water. Turn the Eastern water valve and then the Western valve. Open the door, and operate the corkscrew wheel twice to place your cart and bar back on track. Close the door.The Elemental Workshop II - Small cogGrab a Small Cog from the crate near the northern water valve, and proceed to the mine cart controls. Pull the lever once.
