Typical Process Followed For Window Washing Gilbert

Posted by kcswindow on December 20th, 2017

Well, if you know about the cleaning process and the conditions are favorable and you have the required tools, then you can go for window washing yourself. All that is requires is five simple steps that include scrubbing the glass firstly and then cleaning the frame. This is followed by brushing away the cobwebs from the window or the screen and scraping the dust and dirt out from the glass. Finally, the process is completed by cleaning away the soap remaining on the galls and other parts of the window. It sounds very simple but if the proper technique is not followed then stains and spots on the glass will remain to make all your effort futile.

The First Step

Assuming that you have all the required tools and equipment you can start the process by filling up the bucket to about half of it with cold water. It is better to use cold water as it will not evaporate as quickly as the hot water. Add squirts of detergent to the water to make a soap solution but do not add too much soap thinking that it will clean more. Adding too much of soap or detergent will leave stains and will also require more water to clean the glass surface. You can also apply the detergent directly on the wet mop as you may have seen some professionals do while window washing gilbert.

Rub It With The Mop

The next step is to rub the window with the mop. Wet the mop with the soap solution or by putting detergent on it as you may prefer and rub it on the window. Follow the direction and give it a good rub just like a professional window cleaning Gilbert to make sure that all dust and dirt is lifted. If you find that there are any stubborn stains then you should scrape it off with the help of a scrapper during this time. Care should be taken when you use such scrapper so that you do not damage the galls or the window surface with its blade. Make sure that you pass the blade only in the forward direction.

Squeegeeing The Window

The next step to follow is to clean the window with the squeegee. Assuming that you are right-handed, hold it with your right hand putting your thumb halfway between the top and the side of the squeegee. This will ensure that you have the correct angle when you place it on the glass of the window. This angle is very critical in cleaning the window with the squeegee and that is where the expertise and experience of a professional for window washing gilbert comes handy.

Wipe The Window Clean

The last step of cleaning a window is to wipe off the extra water and soap remains from it. You can use the clean piece of cotton cloth or even a towel for this purpose but make sure whatever you use has the ability to soak water very quickly. This will eliminate the chances of any stains to develop or remain on the glass of the window. It is advised that you use a microfiber cloth only to remove grimy finger marks or little insect marks if that does not come off when you mop. Repeat the process on the other side and for all the windows.