Choosing the Correct Display Cables for Your Raspberry Pi

Posted by Kksb cases on February 19th, 2019

Raspberry Pi is a small electric circuit board that works like a computer after connecting with suitable accessories. You need to connect it to an external power source, and a microSD card is required for storage.

Moreover, you might also need to buy a Raspberry Pi display,and that’s sometimes tricky. However, if you already have a simple screen or Raspberry touchscreen, the next important job is finding the right cables.

According to the device you have, you might need different types of wires. Check out the below article to know the right cables according to the device.

HDMI capable display device

You need an HDMI cable if you have an HDMI capable device and it can be easily found in the home. If you check out the accessories that came with your last TV or monitor, you will see that you already own an Raspberry Pi 3 Case. However, if you don’t find them with any of your devices, you need to buy a new one. You can get a nice new cable around -.

A composite video-capable display device

When you have a tool like TV that is composite video capable, then the composite cable at your home can be used. Composite cable or RCA connector has three colorful plugs that are white, red, and yellow.

The yellow plug is for video, connect your Raspberry Pi and the Raspberry Pi LCD displaywith it, and you are done. However, the supported resolution is small, and you need to use a separate cable for audio because it only supports video.

DVI-D capable device

If your device has a DVI-D connector, then a simple HDMI cable or DVI cable will work. You will not find any issues connecting the raspberry pi with monitor or TV.

One thing that you need to confirm is that the device has a DVI-D connector only and not DVI-A or DVI-I slot because these are analog slots and work differently than the D slot. Only the DVI-D slot sends digital signals, and that’s why raspberry pi supports alone this.

VGA capable device

Old monitors and projectors only support VGA cable, and that’s where things become hard for you. However, if don’t have any option, don’t panic because a few HDMI to VGA converters are available in the market. The only issue is that they are very expensive. You can purchase video supporter and both audio and video supporter according to your needs. If you don’t find it offline, buy it with your Raspberry Pi 7 touchscreen displayonline.

Use SSH

This is the last option when nothing suits you or if you are waiting for your cable to arrive at your doorstep. It is quite simple to use, but you need to be connected to a network. Connect your raspberry pi from a terminal while using an SSH and you are done.

Since you are already connected to the network, install a VNC server in your pi device to move ahead. Now you only need a VNC client to connect.

Click here for more info https://www.kksb-cases.com.