Some Of The Things To Eliminate From Your Mowing Routine This Spring

Posted by ScapeWorx on March 12th, 2019

An improper setting or adjustment of the mower, a dull blade, improper engine speed, clogged deck, and damaged lawn mower part can affect the lawn mowing process and cause problems to your lawn. Some of the problems it can cause include streaking (thin strips of uncut grass left behind the mower), stepped cutting (sharp ridges left in the surface of the lawn after mowing), uneven cutting (wavy troughs in the surface of the lawn after mowing, scalping (deck of the lawn mower strikes the ground), and stingers (patches of uncut grass left behind the mower). If you are wondering what causes these problems, take a look at these common causes that are responsible for them:

• Dull or worn out blades- Dull mower blades make plants weak and susceptible to disease and other stresses, and also affect the aesthetic appearance, which leaves the turf looking brown and unhealthy. To rectify this, it is recommended to sharpen your blades at least two times in every season and replace them when necessary.

• Slow engine speed- When there is slow engine speed, you must ideally mow at full throttle.

• Too fast ground speed- If this ground speed is too fast, consider mowing at a slower pace than usual.

• Clogged or plugged deck- This is another common cause that can make the lawn mowing process a challenge at times. To rectify this, you must clean the deck and mower at regular time intervals.

• Improperly leveled deck- For this, level the deck and lawn properly. Some of the leading lawn mowing services in Pennsylvania can assist you in properly leveling your deck.

• Improperly installed tires- Ensure to check and inspect your tires frequently, and inflate them when necessary.

• Uneven tire pressure- The only way to find this out is with regular inspection of tires. Once you notice that there is uneven pressure in your tires, you must immediately inflate them.

• Improperly installed blades- In an instance where your blades are not properly installed, you want to re-install or replace your blades as soon as possible. You also want to avoid working with dented blades. If you find your blades dented, consider replacing them.

• Damaged deck shell- If your deck shell is damaged or worn out, you have the options of either fixing your deck or replacing it.

• Damaged, bent, or loose mower spindle- In this case, consider fixing or changing the spindle.

• Uneven lawns- An uneven lawn can lead to scalping, which is you want to consider leveling out your lawn. However, leveling out the lawn is no small task. A professional lawn mowing service in Pennsylvania can provide toy the needed assistance in leveling out an uneven lawn.

• Too low deck height- You may want to raise your cutting height because when the grass blades are mowed off very short at the base, it can expose the stems and crowns of the plant, which can lead to scalping.

Some of the leading lawn mowing services in Pennsylvania offer professional lawn mowing and grass cutting services in Glen Mills, Garnet Valley, Media, and Wallingford PA.