Fault Analysis of Cable Gland

Posted by freemexy on March 25th, 2019

Different cable glands are used in the tube industry. As it is used more and more widely, there are some differences in the cause of the failure. So the relevant information about the fault analysis of the cable gland has been paid more and more attention.

The failure of the cable gland is partly due to wearing too long. Some failure or in some cases are due to improper operation.

These will result in damage to the joint. In the event of a fault or short circuit, the related staff need to analyze the surface and internal faults of the cable glands. And then find the appropriate method to enable the cable connector to work properly.

1. The fault analysis of the cable gland surface is needed. And then find a way to deal with it. So the use of internal cables will not be affected by the failure of the cable gland part.

2. We should analyze the faults inside the cable gland manufacturers. It is necessary. Only after excluding non-surface fault, the fault analysis inside the cable gland manufacturers can help us. It will lead to a better development of the relevant trouble shooting solutions.

At this stage different cable glands have been widely used. Many users do not know how it works. So when cable glands fail, many business users are confused what to do next.

The operator needs to understand the working principle. And we also need to know the basic characteristics of the cable gland.

So in the event of a fault or short circuit phenomenon, the fault analysis of cable gland is carried out at the first time. Then the solution to the problem is obtained.

In addition to the above failures analysis, clean maintenance for the cable gland manufacturers is also needed. So the joint device can maintain the best state. And it will effectively extend their life, and reduce the failure rate.releasable-cable-ties