Instructions for self-modifying home voltage stabilizers

Posted by fushin on June 24th, 2019

Voltage stabilizers are important devices in the home electrical system. This device is operated 24/24 so during use, it will inevitably occur incidents and failures. When encountering such situations, users often carry out warranty and repair. However, there are simple errors that users can self-test and fix at home. Following, Fushin voltage stabilizer will guide you how to fix the voltage stabilization at home? The following article will summarize some basic errors, causes and the fastest ways to fix them so you can repair the voltage yourself without having to bring it to the warranty center.

Currently, there are many voltage stabilizers in the market such as Fushin Voltage Stabilizer, Lioa Voltage Stabilizer, Robot Voltage Stabilizer .... Most types of voltage stabilizers have the same operating principle, so this article can Applicable to all damaged voltage stabilizers ...

1. FREQUENTLY ASKED QUESTIONS

- Machine loss of voltage stabilization effect (output voltage is higher or lower than 220V)
- Using a machine that does not match the current voltage, the voltage is lower than the operating range of the machine
- The machine has a coil
- Voltage stabilizer has power input but no electricity
- Output voltage is higher than input voltage
- Output voltage is lower than input voltage
- Working machine emits a loud noise
- Machine has a phenomenon of electrical leakage to the shell (causing danger)
- Machine frequently collapses erratic automat
- There is a phenomenon of ignition inside the machine during load operation.
- The output voltage is cut off and then come back .....

2. CAUSES OF DAMAGING STABILITY

- The machine runs many years without regular maintenance
- Parts error, damaged control board, motor, clock, CB, piles ...
- Machine for long time no use when using trouble
- Machine for dirt
- Connection power cord is not suitable for machine capacity
- Wrong connection wrong connection
- Input power does not match the specifications of the machine
- Machines often have to run overload

3. PROCESS OF REPAIRING PROBLEMS

• B1. Checking the connection must ensure that there must be a power source on the two terminals of the machine, possibly due to long-term use, the conductor is easily oxidized, so it has poor contact, so the voltage stabilizer has no input power.
• B2. Check the CB (aptomat) of the machine is still in good use to ensure normal shut-off, when opening the CB must have electricity,
• B3. Checking the clock, the indicator light is still working properly
• B4. Remove the test machine if the wire is burnt, black burnt or not, the wire district rarely burns but if it is burned, the repair is very difficult and the possibility is to throw it away.
• B5. Checking the motorcycle still spinning,
• B6. Check the controller
The above are the steps to check when repairing your voltage stabilizer, to repair the voltage effectively you need to have electrical measuring devices, such as vol meters, electrical accessories to help repair ... ..
Check that if you know that your voltage stabilizer is damaged, if you can't fix it yourself, bring a voltage stabilizer to the nearest warranty center for the most professional warranty and repair. .

4. QUANG NINH PRESSURE REPAIRING SERVICE

With a team of experienced and enthusiastic technical experts, product sales and introduction centers work all days of the week (both Saturday & Sunday). You can bring damaged products to our centers. Technician team will check, repair, replace genuine components with the most reasonable price, ensuring to bring you the most satisfaction, best quality.

- For power source and transformer products, you can change immediately or repair on the spot with reasonable prices.

- For products of Stabilizer, Transformer 3-phase types, technical staff will make it fast and dedicated and attentive, customers will be completely assured.

- The choice of buying products of Stabilization, Transformer, Control transformer (biến áp điều khiển), Fushin isolation transformer (biến áp cách ly) ... of Quang Ninh Voltage Regulator is wise, you will be served best, good technical staff Best, lowest price, best quality products.

Note: In order to save time and travel costs, all technical questions or warranty service, voltage stabilization and transformer repair, you can contact us directly via hotline 0919 703 817, they I will answer all questions about the information related to technical advice, advice on purchase, repair, warranty and maintenance of voltage and transformer stabilizers, .... to the best of my ability, We are always eager to serve customers with the most enthusiasm.