The Characteristics of Jaw Crusher

Posted by birder2525 on October 28th, 2019

The jaw crusher does not have sieve grate bottom, even if it is high wet material, it will never clog up. The jaw crusher has the advantages of large production, low noise and high crushing efficiency.
This solves the problem that the hammer and liner of the old crusher wear too fast. The jaw crusher is suitable for large, medium and small brick factories, coal washing plants, slag mills, coal mines and other industries. It has the following characteristics and performance:
1. The jaw crusher is broken through the two channels of double rotors, no sifting device, all kinds of wet slag can be broken, even if it is taken out of the water, it can be broken at any time, there is no sticking blockage phenomenon. The general crusher, because the material is stuck in the crushing cavity and causes blockage, causes the related parts to aggravate the attrition. This series crusher can avoid the above phenomenon.
2. High alloy wear-resistant hammer.
3. Unique displacement and clearance technology. After the hammer is worn, it does not need to be repaired. The mobile position is repeatedly used. A hammer can be used with three pairs of hammers.