The Development of Sand Making Machine

Posted by birder2525 on December 30th, 2019

The sand making machine is a new type of brick making equipment designed and manufactured in accordance with the similar characteristics and market needs at home and abroad.In 1970s, our country introduced the eight-hole sand making machine abroad.It uses river sand and a small amount of fly ash and cement to suppress lime sand bricks.However, the rotation of the disc can only press one piece of brick at a time, and the output is low.

When the large amount of industrial waste fly ash is used, there is a stratification phenomenon in the lack of exhaust. It cannot meet the requirements of the national wall reform and not meet the national industrial policy at that time.In order to improve the output and make up for the disadvantage of easy delamination of the defective products, the domestic mechanical engineers have developed a crankshaft type double crank mechanical pressing machine with two blocks, three blocks or even four blocks.

Because of its special pre pressure buffer design and the adjustment of the depth of the material, it can be qualified for the national policy of industrial structure of the new wall material with large amount of fly ash as raw material.The equipment inherits the eight-hole turntable type brick press without the need of the bracket, the advantages of the direct palletizing, and the stability and reliability of the mechanical motion, and 15~17 times a minute to ensure the production and quality of the single equipment.