4 Steps to Deal With Leaky Water Pipes

Posted by lukesmarini on February 24th, 2020

Fixing a leaking pipe requires prompt action. Since it may cause damage to property, you should look for different types of methods to fix it in time. Although you should choose the perfect drain cleaning service in Whittier, you should know some temporary fixes to the situation. You can, for instance, gather information about the different types of methods needed for controlling the water that is leaking. Also, looking at other methods needed to protect your house from damage will help.

Here are some of the steps involved in fixing a leaky pipe in your house:

Step 1: Turn off the water supply

To begin with, you should first take active steps towards turning off the source of water supply. This will ensure that there is no more water flowing to the already leaky pipe. You need to check whether you have access to the source of the water supply or not. If you do not know about its methods, you should follow the pathway to the water supply and turn it off carefully. To avoid any problems, you should wear protective hand gear.

Step 2: Dry out excess water

Once you have stopped excess water flowing to the leaky pipe, you need to remove the excess water in the pipe. This can be done by switching on the faucet of the particular pipe. After you turn it on, you should wait for some time till all the excess water flows out of the faucet. If needed, you should open more than one faucet and remove the water that is causing the pipe to leak. This will ensure that you do not need to deal with any additional hassles.

Step 3: Wipe the wet area

An important step in dealing with a leaky pipe is to dry out the wet area of the pipe. To do this, you need a cloth or a material that can dry out the water on the pipe. Starting from the source of the water to the faucet, you need to be careful about drying all the water that is present on the surface. You need to wipe the wet area as this will lay the groundwork for using different solutions to deal with the leaky pipe.

Step 4: Use Epoxy Putty

Finally, you should wear gloves and use Epoxy putty to create a temporary fix to the leaking pipe. You can begin by mixing the Epoxy with your hand and kneading it in a manner that creates a firm fixture for the place. This may take several minutes. Once you are sure that the Epoxy putty is present in the right concentration, you can apply it over the spot. Leave it to dry and once you are done, you can resume your regular water operations.

If you wish to seek the best drain cleaning service in Whittier, CA, you should get in touch with various service providers online.

Author’s Bio- The author is an avid writer. This article is about fixing leaky pipes.