Atten AT938D 60W Digital & Lead-free Soldering Station
Posted by attentools on March 4th, 2020
Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons (1, 2, 3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.
Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.
https://www.atten.com/products/at938d-60w--digital-lead-free-soldering-station.html
Specifications: | Packing list: | Standard Packing: |
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) |
Main Unit: 1 Unit |
Inner box: 25x21x13.4(cm) |
Power:60W |
Handle set : 1 PCS |
N.W.: 1.79kg |
Heater Voltage:24VAC |
Iron stand: 1 PCS |
G.W.: 2.03kg |
Temperature range:150~450°C |
AC cord: 1 PCS |
Carton: 12 PCS/Carton |
Temperature offset range:±50°C |
Manual: 1 Copy |
Size: 51.5x44x43(cm) |
Temperature stability:±2°C (in still air, no load) |
Cleaning sponge: 1 PCS |
N.W.: 24.4kg |
Setting method:adjust by buttons |
|
G.W.: 25.6kg |
Temperature calibration:digital |
|
|
Heater:60W dual-core ceramic heater |
|
|
Tip-to-ground impedance:< 2Ω |
|
|
Tip-to-ground voltage:< 2mV |