Amico Plasma Cutter

Posted by KelvinCoud on December 3rd, 2020

How plasma cutters work?

Are you looking to cut any metal or sturdy material?

If so, you need to think about choosing the right cutter. The type of cutter which is perfect for such an application is the plasma cutter.

Before you make up your mind about plaster cutters, you need to look at the functioning of the plasma cutter. We will today help you understand how plasma cutters work and also their advantages and disadvantages.

How do plasma cutters work?

Plasma cutting essentially uses heat to melt the metals and cut it. In a nutshell, it uses the thermal cutting method.

Plasma is a hot matter which is produced by using compressed nitrogen and other such gases. Once the plasma is created, the surface which needs to be cut is exposed to it.

The plasma, which is thus produced, is electrically conductive. The workpiece is mounted in such a way that it is connected to the ground. Due to the same, the charged ions cut the metal. The working principle involves cutting using the high temperature of the plasma as well as the charged Ions. The gas produced due to the high temperature blows away the molten metal. In a nutshell, you will not only be able to cut the surface but also separate it.

As you can see, these cutters are incredibly efficient if you're cutting electrically conductive surfaces. Not only that, they can cut with efficiency and also separate the two pieces as well.

Now that you understand how plasma cutters work, it is time to look at their advantages and disadvantages.

Advantages & disadvantages of plasma cutters:

Firstly, let's take a look at the advantages of these cutters.

Advantages:

The advantages include:

1. Plasma cutters can cut any electric conducting material. This includes ferrous metals as well as any other metal.

2. These cutters can easily cut metals up to 150 mm.

3. These cutters are highly precise. Precise cutting is possible when using such plasma cutters.

4. The cutting speed of these cutters is on the higher side. You need not spend a lot of time on cutting the metals.

Now that you are aware of the advantages let us look at the disadvantages.

Disadvantages:

Once you look at the disadvantages, you can make the buying decision quickly.

1. If you have a thin sheet to cut, such cutters will not offer the same finesse.

As you can see, plasma cutters are incredibly effective. They can cut any electrically conductive material. With numerous advantages on offer, there is no reason why you shouldn't go with amico plasma cutter.