some friends are not very familiar with the safety of the aerator in fish ponds

Posted by techbrush on December 8th, 2020

When installing the oxygen machine, you must remember to cut off the power supply, because the cable cannot be under tension in the pool, so it is not correct to install it when the power is on. However, some friends are not very familiar with the safety of the aerator in fish ponds. The motor of the aerator is also a part to ensure safety, so when using it, you should also ensure the correct use of electricity and the use of the motor, so as to prevent the operation of the aerator from malfunctioning. First of all, the fish pond aerator should be installed correctly, so that we can have higher safety when using it. If the aquatic aerator is used in fish ponds, its function will make us have better economic benefits. When the aerator is started, it is necessary to closely observe its steering and operation.

The cable should be fixed on the rack with a lock clip, and it should not hang into the water. The remaining part should also be Shrimp Feeder Machinery led to the power source on the shore according to the regulations. Below we Let’s discuss with you how to use the aerator to ensure safety during operation. If there is any, you should cut off the power supply and restart it after connecting the fuse. If there is no water line, generally the upper end surface should be kept parallel to the water surface to prevent the motor from being burnt out due to overload. If there is a buzzing sound, you need to check the line to see if there is a lack of phase operation. It is inseparable from the use of aerators in the aquaculture industry.

The correct installation is not to pull the cable as a rope. When using the fish pond aerator, you should also pay attention to the installation of the protective cover, because this device is a device to protect the motor from water and must be installed correctly. If an abnormal sound is found, it indicates that there is a problem with the operation. When in use, it should be equipped with thermal breakers, thermistor protectors, and electronic protection devices. Through our narration, are you still clear about the operating safety of the fish pond aerator? If you feel that there is still something you don’t understand, you can directly call for consultation, and we have professional staff to answer you. When not in use, it should be ensured that its power is turned off to avoid accidents.

When the aerator is in use, it must be safe to operate, which will directly affect the survival rate of the aquaculture in the fish pond. Therefore, pay attention to the sound of the aerator when it is working. When the aerator enters the pool, its torsion is very large.. We need to adjust the steering in time to keep the operation in balance. You must not take a floating body to observe in front of the aerator to avoid safety problems. Pay attention to the impeller of the aerator, so the position of the equipment in the water should be aligned with the corresponding waterline during installation. If the depth of the impeller and blades after being immersed in the water is correct, about four centimeters, if the depth is too deep, the load on the motor will increase, and the motor will be damaged