For Fire Fitting and safety charts, get in touch with us

Posted by Alma Safety Devices on December 17th, 2020

Fire Fitting is a fitting that is either made from steel or plastic and is put into one side of the wall to be used for venting purposes, or just to keep the heat out. There are different types of fire fitting available and you will have to decide what is best for your needs. If the area you are fitting is small then you can use a small tap or a two-disc type. If the space is larger, you could use a gas operated one or a wood burning one.

The standard fire fitting has been made from steel or aluminum; these are usually suitable for domestic uses. The ones used in a domestic setting are usually called Tee Join or Pipe Joins, and they come in a variety of diameters greater than twelve inches, as these are used for domestic installations. And they're indented on the inside for ease of jointing. The other type of fire fitting, we are going to look at is called coupling. A coupling is basically a fitting that allows a hose to be attached to a fitting and are generally longer than Tee Join fittings. These can be used for venting or hose reels but not usually for household applications. Couplings are available in various diameters depending on the needs of the users, and they can be made from many different materials such as stainless steel, copper, brass or aluminium. Some hose couplings are made from anodized copper, which is a very strong material and will not corrode or rust easily.

If you are in the business or have been in it for any length of time then you must know and understand the importance of safety charts. These charts have been very helpful and useful to many contractors who understand the risks involved in each job they perform. Safety charts will keep all employees and contractors educated and up-to-date on hazards they may be exposed to on a daily basis. They will keep them aware of the dangers and limitations of their job and the type of protective equipment they need to work safely.

When creating safety charts for your company, there are many factors that should be taken into consideration. The most important factor in creating your charts is to ensure that the information is accurate and current. This will allow you to effectively communicate the information to your team of contractors and workers. It is also important to have each category clearly labeled and easily identifiable so that if there is a need to refer back to it, all members will be able to.