A Step-by-Step Guide to manufacturerPosted by Edgar on December 19th, 2020 Created fittings are used to connect, branch, blind or route little size piping systems (generally, listed below 2 inches). Contrary to butt weld fittings, which are made from pipes and plates, forged fittings are produced by creating and machining steel. Created fittings are readily available in numerous shapes, sizes (bore sizes and pressure ratings) and created material grades (the most common are ASTM A105, ASTM A350 LF1/2/3/ 6 for low-temperatures, ASTM 182 for destructive, high-temperature applications). Forged fittings are linked to pipelines by socket weld or threaded connections. ASME B16.11 is the reference requirements. Created fittings are manufactured according to the ASME B16.11, MSS SP 75, MSS SP 83, MSS SP 95 requirements to fit ASME B36.10 carbon and alloy steel pipes and ASME B36.19 stainless steel and nickel alloy pipes. CREATED FITTINGS TYPES CREATED ELBOW 45, 90 DEGREES EQUIVALENT AND REDUCING FORGED TEE FORGED LATERAL CREATED PIPELINE PLUG HEXAGONAL BUSHING COMPLETE AND HALF COUPLING FORGED REDUCER AND REDUCER CREATED UNION BONDING EMPLOYERS Created Olets SOCKET WELD FITTINGS THREADED PIPE FITTINGS CREATED ELBOW 45, 90 DEGREES Created elbows are utilized to change the instructions of the piping system by 45 or 90 degrees. Forged elbows are produced according to ASME B16.11 in numerous material grades, either with socket weld or threaded pipeline connections. An unique type is the so-called "street elbow". Forged elbows 45 and 90 degrees, street elbow. 45-Degree and 90-Degree Elbow Fittings with SW & Threaded Connection Ends. Pressure: 2000LBS, 3000LBS, 6000LBS, 9000LBS Size: from 1/8 ″ to 4 ″. Product: ASTM A105, F304, F316, F304L, F316L, A182 F11/F22/F91. Connection ends: socket weld and threaded. We have a group of skilled specialists with years of experience in production. THREADED PIPELINE FITTING SS304 ACCURACY CAST FITTINGS. Threaded Pipe Fitting SS304 with 90 degrees Elbow, Class 150lb, Male and Female Thread. Size: 1/2 to 4 inchesb. SS304 90 degrees elbow, class 150lb, with male and female thread. Materials: SS304 and SS316. Manufacturing requirements: ANSI, JIS, and DIN. Our prefessional foundry can do sand casting, lost wax casting and pass away casting. The product as bellowing:. Gray Iron, Ductile Iron, Steel, Stainless-steel, Malleable Iron and Alloy. The products is extensively used in vehicle, equipment, pipe fittings, pump parts, valve part and other market. We are a group company consisting of:. 4 Sand Casting Plants (generally produce Cast Iron and Ductile Iron Products). 2 Resin Sand Casting Plants (primarily produce Cast Steel & Cast Iron Products). 3 Investment Casting Plants (primarily produce Stainless-steel and Carbon Steel products). THICK-WALLED SEAMLESS CAST IRON PIPE. Size: O.D.219-680mm, W.T.:40 -90 mm. Mateiral:10 #, 20 #, 35 #, 45 #, 16Mn, 27Simn etc . EQUAL AND REDUCING FORGED TEE. Forged tees are used to branch a pipe at 90 degrees. A forged equal tee features identical bore size for the header and the branched pipeline; a decreasing tee has two various bore sizes (larger for the run pipe and smaller for the branch pipe). Both types of forged tees are offered with socket weld or threaded connections. The dimensions of created tees are set by the MSS SP 75 and the https://gumroad.com/eferdockbs/p/why-you-should-spend-more-time-thinking-about-copper-nickel ASME B16.11 specs. SOCKET WELDING TEES (FORGED HIGH PRESSURE PIPE FITTINGS). We have a group of experienced specialists with years of experience in manufacturing. Socket-weld or threaded (npt or pt type. ). Pressure: 2000LBS, 3000LBS, 6000LBS, 9000LBS. Size: from 1/4 ″ to 4 ″ (6mm-100mm). Product: ASTM A105, F304, F316, F304L, F316L, A182 F11/F22/F91. Connection ends: butt bonded, threaded. Rating:. 1. Threaded wog: 2000, 3000 and 6000 lbs (140kgs/cm2 -210 kgs/cm2 -410 kgs/cm2)( sch 40-- sch 80-- sch 160 ). 2. Socket-welding wog: 3000, 6000, 9000 pounds. (sch 80-- sch 160-- xxs ). Spec:. 1. Dim. Spec: Asme b 16.11-1996 (rivision of ansi b16.11-1991), mss-sp-79 \ 83 \ 95 \ 97 and gb/t 7306, 12716, 14383, 14626, spec. 2. Material specification: Astm a105, astm a182( f304, f304l, f316, f316l, f304h, f316h, f317l, f321, f11, f22, f91), gb/t 699 20mn. 3. Size of raw material: Dia. 19-85mm round bar. End up:. Galvanized or black. (carbon), pickled( stainless). CREATED LATERAL. Created laterals, featuring a Y shape, are used to branch the piping system in 2 directions, that have a 30-degree angle (or various, according to the piping specifications). FORGED PIPE PLUG. Forged plugs are offered with round, squared or hexagonal head and are utilized to blind pipes. Pipe plug can hold up against high pressure, it is gotten in touch with the main parts of the pipeline, it can be used in different types, various connection types, they are not the same as the level of pressure, the type is lots of, there are different angles of elbow, there are four, 3 and so on, but the production of each pipe is basic, we pertain to the particular understanding of. First, the function and attributes of the pipe plug. The product of the pipeline plug is carbon steel, stainless-steel, etc. many of the pipe fittings for oil, natural, building and lots of other markets, it does not need to pipe billet basic materials, production is easy, the process is also very good operation, can save the cost of pipe devices, and the expense of the mold, it is just in accordance with the arrangements of the task to fix. Second, to do a good job in the evaluation work. Its technology is based upon its geometry and procedure qualities, it is the structure of the mold and the shape of the pipeline plug is a terrific link in the use of the process must be regular examination, it has no deterioration, rust is any pipeline will occur, if once found corrosion, to make sure the typical operation of the pipeline, according to the proper method to examine. Third, the material and the attributes of the pipe plug. Elbow pipeline fittings and other materials elbow is different, it's inside a number of chemical substances will make elbow surface long time of not rusty, not easy to be corroded, it's a great deal of product, such as carbon steel, alloy steel and so on, the cost is extremely cheap, making use of a large number of alloy steel elbow is utilized to limit. Fourth. The difference between the pipe plug and carbon steel tube. The primary distinction is that the product is not the exact same, the elbow is much better than the carbon steel elbow rust resistance, particularly stainless-steel elbow it is difficult to be worn away, due to the fact that it is very little carbon content, mainly high chromium content. The life span of the socket elbow is very long, and the life span can be grabbed several decades. pipe plug fittings are great, it can avoid the ultraviolet ray, avoid radiation, it can let the item will constantly hold true color, has a great corrosion resistance, it can withstand lots of chemical substances, not afraid of acid, alkali, will not rust and breeding germs, not afraid of electrochemical rust. Threaded Plugs and Bushings. Small Pipeline Size. 1/8. 1/4. 3/8. 1/2. 3/4. 1. 1 1/4. 1 1/2. 2. 2 1/2.
3. 4. A. 1 3/8. 1 5/8. 1 5/8. 1 3/4. 1 3/4. 2. 2. 2. 2 1/2. 2 3/4. 2 3/4. 3. B. 13/32. 17/32. 11/16. 27/32. 1 1/16. 1 5/16. 1 11/16. 1 29/32. 2 3/8. 2 7/8. 3 1/2. 4 1/2. C *. 7/16. 5/8. 11/16. 7/8. 1 1/16. 1 7/16. 1 13/16. 2. 2 1/2. 3. 3 3/4. 4 5/8. D. 1/4. 1/4. 5/16. 5/16. 3/8. 3/8. 9/16. 5/8. 11/16. 3/4. 13/16. 1 1/4. E. 7/16. 1/2. 9/16. 11/16. 3/4. 27/32. 7/8. 15/16. 1. 1 1/4. 1 9/16. 1 21/32. F. 9/32. 3/8. 7/16. 9/16. 5/8. 13/16. 15/16. 1 1/8. 1 5/16. 1 1/2. 1 11/16. 2 1/2. G. 1/4. 1/4. 5/16. 3/8. 7/16. 1/2. 9/16. 5/8. 11/16. 3/4. 13/16. 1 1/4. H. 3/8. 7/16. 1/2. 9/16. 5/8. 3/4. 13/16. 13/16. 7/8. 1 1/16. 1 1/8. 1 3/8. J *. 5/8. 11/16. 7/8. 1 1/16. 1 7/16. 1 13/16. 2. 2 1/2. 3. 3 3/4. 4 5/8. K. 3/16. 3/16. 3/16. 1/4. 1/4. 3/8. 3/8. 3/8. 1/2. 13/16. 1 1/4. L. 1/2. 9/16. 11/16. 3/4. 27/32. 7/8. 15/16. 1. 1 1/4. 1 9/16. 1 21/32. M. 7/16. 1/2. 9/16. 5/8. 3/4. 13/16. 13/16. 7/8. 1 1/16. 1 1/8. 1 1/4. [youtube https://www.youtube.com/watch?v=GBgB7Tbc9rA] N. 3/8. 7/16. 1/2. 9/16. 5/8. 3/4. 13/16. 13/16. 7/8. 1 1/16. 1 1/8. 1 1/4. * Dimension J for Hex Head Bushing and dimension C for Hex Head Plug Like it? Share it! More by this author |
