Effective Tips On How To Maintain A Submersible Pump

Posted by Xylem on December 29th, 2020

If you don’t maintain your submersible pump, you will have to do a costly submersible pump repair in New Zealand sooner or later. Whether we talk about household use or business use, no one can deny the benefits of a submersible pump. These are the pumps that can be used to push water out from a well or the underground and fulfil your water needs. Technology has led to the improvement of submersible pumps and now submersible pumps are more advanced than they used to be. However, when using a submersible pump, it is important to maintain it to ensure a long life. You can do this by taking good care of your pump.

Observe the frequency of maintenance

Observation is the key. You need to keep a regular check on the water leak of the pump, vibrations and unusual sounds. Doing this will help you evaluate the period when your pump requires maintenance.

Lubrication

Your water pumps should be lubricated sufficiently by the guidelines of the manufacture. It is also important to ensure that you don’t over lubricate your pumps. Over-lubricating the pump can result in damages of the bearing. If the bearing of the pump has a vent cap, you will have to remove the cap and run the submersible pump for 30 minutes before you re-install your pump.

Do not allow overheating

Overheating of a submersible pump happens due to insufficient water level. Submersible pumps are cooled by the water they are submerged in and without sufficient water, you will have to spend a lot of money on submersible pump repair.

Flush pump after use

The distance between the diffuser and impeller is very less in submersible pumps. The pressure and flow rates are also high in these pumps. You should avoid dirt under the pumps by applying clean water lush.

Motor inspection

Motors are very important parts of a submersible pump. This means that it is necessary to check the motors of your pump. Make sure that all terminations are tight. Check the contractor or starter for arcing and overheating. Prevent motor windings and wing from dirt and dust.

Frequent inspection

People tend to ignore the maintenance and care of submersible pumps. They go for a long time without being seen. To ensure their optimal longevity and performance, submersible pumps should be inspected frequently. Through frequent observation, you can determine the condition of the electrical wiring, water leaks, seals and valves. It is therefore important to do a constant check of your submersible pumps.

Replace damaged hoses and seals

If there are damages on seals, horses and show wear, replace them immediately. To prevent slips and leaks, use temporary rubber assembly lubricant.

The above maintenance tips will help you avoid costly submersible pump repair NZ services. If you feel like you cannot do the maintenance by yourself then it is worth it if you hired someone to help you with the job. There are professional companies out there that will carry out the maintenance of your pump at affordable prices.