15 People You Oughta Know in the vibrator kopen Industry

Posted by Kierstead on January 1st, 2021

COMMON PROBLEMS OF MOBILE CELL PHONES AND THEIR REPAIR.

™

There is no doubt that dust is a major problem to all electronic equipments, the cell phone is no exception. The warning "keep in a clean, dry and safe place free from moisture" in most electronic devices buttress this point.Component rust and corrossion due to the presence of dust and moisture ladden air result in broken circuit and bridging of electronic wiring. This nuisance is well known to the cell phone repair engineer like in other electronin repair.Once the cell phone is dismantled, repair begin with the use of hot air from the rework station to fire ( solder down ) all components in the PCB in case some lost contact as a result of phone drop. Troubleshooting continue with the cleansing of the pcb including any other necessary part with methilated spirit/volatile liquid. For drying, hot air from the hot air station is used.It should be noted that resoldering must be done pribeing brushed off compleatly. In most cases the above is all that is required tobring the cell phone in question back to life.The common problems of cell phones are:(!)Power problem(2)Ringer problem(3)Vibrator problem(4)Ear piece problem(5)Keypad problem(6)Phone locked(7)Phone tripping off(8)Mouth piece problem(9)Mobile phone malfunction(10)Network problem(11)Charging problem(12)Screen problem

POWER PROBLEM: In this case the cell phone refuse topower on. (1)Check battery voltage and make sure it conform with manufacturers' specification (usually 3.7 volts) (2)Check and clean battery connector to PCB Make sure the connection is not damaged. (3)Charge the phone with aworking charger. If it charges the phone but phone do not power on, the power switch could be responsible. (4) Check power ic for burn, fuse and other components on PCB that concern power.(5)If all the components are ok, the problem could be software. The phone may be flashed with the appropriate fileRINGR PROBLEM:(1) Go to the setting menu and make sure the ringer option is turned on. Note that in some cell phones when headset is attached to phone, it will not ring through the speaker until you remove it. (2) Go to profile and make sure silent ,flight or online mode and the like that shut off volume is not activated. (3)Adjust the volume control of ringer. (4) Make sure call divert is not activated as this will take your calls to voice mail without ringing.(5)If all these are ok, check the ringer track for continuity using your multimeter. If not still ok, replace the ringer with a working one. If this does not solve the problem, there might be the need for a software update. Flash the cell phone with the appropriate flash file.

VIBRATOR PROBLEM: (1) Make sure that the vibrator is ok by connecting it to the ends of a battery. If ok, it shpuld vibrate. (2)Make sure that the vibrator is turned on from the setting menu. (3) Make sure that the vibrator contact the PCB. (4) Check the vibrator track for open circuit.

EAR PROBLEM : Make sure that the ear piece contact the PCB.92) Test the ear piece with a multimeter and make sure that it is ok. Put the ear piece in a working phone to be sure that it is good. Also replace the ear piece with a working one to know where the problem is. Clean the PCB with methilated spirit/volatile liquid and brush after soldering down all panel components with the aid of a rework station.A software problem is suspected if all these fails. Flash the phone with the appropriate flash file.

MOUTH PIECE PROBLEM: (1) Test the mouth piece to make sure that it is ok. (2) Make sure that the mouth piece make contact with the panel. (3)Clean the panel and the mouth piece to ensure that they are dust free. (4) Replace the mouth piece with a working one. (5) Check the mouth piece track to ensure that there is no open circuit.(6)Check the audio tracks Heat/solder the audio ic. (7) If all these fails,then a softwareproblem is suspected Flash the phone with the appropriate flash file.

KEYPAD PROBLEM:(1) Make surethat thereisno security device in place.You may need a code to dissable thekey lock. (2) Ensure proper contact of the keys with the PCB. (3)Make sure that the keypad s are not stucked .They should be able to move freely ie bounce up and down.(4) In some flip or sliding phones, there may be online vibrator the need to remove the side scroll keys or /and the mouth piece for them to work. If the mouth piece is responssible, replace it. (5)Check the keypad track to make sure that there is no open circuit.

N.B. The next post will look at the remaining common problems, take a bird eye view of copmmon software problems, how to solve them and deal briefly with the common problems not listed here that are experienced by cell phone users including suggested solutions. And before summarising, we intend to look ata guides on how to possibly repair the camera,Radio, computer?,video,Television,Gun?,Players etc that are now being built into the cell phone to promote market.

N.B This article is divided into four posts. You can read the full article in the blog above. This is the first post.

The Flabelos machines are a new training tool that you usually find now on fitness salons and gyms and are steadily rising to popularity among health and fitness enthusiasts. This is also called the Whole Body Vibration (WBV) trainer. While the Flabelos is a recent product, the WBV training has been practiced by people for more than 30 years now. The NASA developed this training originally for astronauts to help them prevent osteoporosis and also wastage of muscles.

As the machine runs, the vibrating plate of the Flabelos moves up and down according to your set speed. While you are standing there, your body is trying to vibrator kopen stabilize, impacting your muscles and creating more muscle contractions. This movement also generates vibration impulses which make way to your spinal cord through your nerves. There should be no worries that your head will shake as the Flabelos machines are running, because it is in the pelvis that the movement will be absorbed. This process of muscle contraction results in your firming and toning up!

The Flabelos machines are easy to use. You just stand on the vibrating plates of the Flabelos either with your feet apart or a bit closer. You need to set the speed up and down, or opt for the pre-set program. It is recommended that you start low while getting the feel for the vibration machine. You may copy what others do - use the pyramid method, in which you start low at 8, speed up to 18, then finish at 12. Another method is starting low and then speed up, say 6 to 10 to 15 then finish at 19.

You should move your body while standing on the vibrator plate. Lean back and forward, bend your legs, or move from side to side. As the speed changes, you will find that certain positions will suit you better. To get good results, the machine should be used like other gym equipment - you must be comfortable first. And like a treadmill, it is not necessary to set it at the highest speed all the time.

Flabelos machines really work, and all you need is 10 minutes of work out every day. Standing on the vibrating plate of the Flabelos for just 10 minutes is equal to a work out for an hour on the gym. Medical academics and fitness professionals are all recommending this vibrating machine, especially to people who are too busy to spend an hour at a work out. Even some celebrities like Gwen Stefani, Madonna, and the X Factor (US) judge Nicole Scherzinger are reportedly using the WBV training. They make it their regular fitness and weight loss routine.

Here are the benefits that you can expect to get from the WBV training program.

• You lose weight,

• You burn fat,

• You tone up,

• Cellulite is reduced,

• Your muscles improve its strength and flexibility,

• Varicose veins are minimized or lost,

• Joint and lower back pains are minimized.

As in other exercises, the vibration machine must be used in conjunction with eating the right meal and drinking a lot of water, to attain a sustained and maximum weight loss.