Diagnose Water Heater Leak with Austin Leak Detection
Posted by articlelink01 on June 26th, 2014
If you have found out that the faucets of your homes do not have hot water flowing, you have to check the water heater and see if you can understand where the problem came from. You might be able to save a lot of money by changing the defective part instead of just playing for a plumber. Hiring one will require you to pay for him on a per hour basis. You can check the water costumer service for more information about how to trouble shoot the heater since there are different steps that must be done for a particular model of a water heater. You can also download a manual online to fully understand what the company wants you to do in times like this.
First thing that you should do is to check the circuit breaker box first if you are using an electric water heater. Next is to reset the breaker switch if it has been tripped. Next is to check the manual to be able to find out if there is a reset option on the thermostat which can also be tripped. Connecting the circuit tester is the next thing to do concerning 2 terminals of the heating element. Changing the element if there is no current recognized is a must.
Next thing to do is to make sure that the light is well lit but this is for gas powered water heater. If the heater doesn’t stop heating as soon as the pilot is lighted, the thermocouple or the gas controlling unit should be changed. Lowering down the temperature setting of the thermostat if there is a noise in the pipes coming from the faucet is also needed at times. If the thermostat is in its highest setting, steaming will occur and will cause rumbling sound too.
Next thing that you should do is to drain the tank and then flush out all the sediments inside the tank. This can be made if the hot water is becoming cloudy or the water pressure is becoming low. Closing the gas supply valve first is a must before doing this step. You must turn off the cold water line first running through the heater before doing anything. You can attach a garden hose to the tank bottom and then open the valve to let the water drain. Turning on the cold water to flush out the water heater’s tank can be made as well. Close the drain valve before terminating the garden hose as soon as the water from the tank is clear.
Check the tank and the connections of the plumbing for any signs of leaks. Change the supplies with cracks. If the water line is leaking where the connection point is situated, you must shut off the cold water valve and then unscrew the line. Wrapping the threads with Teflon tape around to make the water line tight, you can wrap it to seal the water supply line. If you will see that the water is leaking from the bottom part of the heater, the tank should be replaced. But after the warranty, the company will no longer offer free inspection and repair; you will need the help of Austin Leak Detection system. Leak Repair Austin will help you go through the problem easily. Austin Leak Detection will do the checking of the leak and when they have found out that there is a problem they will conduct Leak Repair Austin.
Water heater leak repair is a big problem that needs Austin Leak Detection - http://austenplumbing.com/ - . Leak Repair Austin - http://austenplumbing.com/leak-repair.html will be there for you if you need help.
