Massage Tub

Posted by aihw on January 11th, 2021

Massage Tub

The massage bathtub includes a cylinder body, the cylinder body is provided with a cylinder side, a shower and a switch are arranged on the cylinder side, the cylinder body is circular, and the cylinder body is provided with a surfing nozzle and a bubble nozzle. The utility model has the characteristics of convenient bathing and washing and good massage effect, and is a sanitary ware suitable for use in families, hotels and other places.

Principle of Massage Tub

The massage bathtub is mainly through the movement of the motor, so that the nozzle on the inner wall of the bathtub sprays the water mixed with the air, which causes the circulation of the water, which has a massage effect on the human body. Take Kohler's single-speed water pump and pneumatic switch massage bathtub as an example: as long as the bathtub is filled with water, it can run on its own. There is a suction port at the bottom of the bathtub, and the water is sucked from here to the pump, and then flows back to the bathtub through the nozzles installed on both sides of the bathtub. At this time, air is sucked in from the air inlet and mixed with the water flow at the nozzles. By rotating the edge of each nozzle, the air flow can be adjusted.

Function Of Massage Tub 

1. Fitness treatment:

Drink a glass of water at room temperature to help clean the systemic circulatory system. The water temperature is preferably 34℃; start the hydromassage system and run for 8-10 minutes. During this time, the massage water flow can relieve the nervous tension on the skin surface; according to the following methods Shower with 20℃ water: from left foot to hip, from right foot to hip, from left hand to shoulder, from right hand to shoulder (all from bottom to top), put the shower on the abdomen, place The shower head is placed under the back.

2. Relieve stress:

Fill the bathtub with water at 36℃, and add some water-soluble bath oil with relaxing effect to enhance the effect of hydromassage; start the air massage system and run for 3 minutes to let the air bubbles from the bottom relax the muscle tissue, and The skin increases its elasticity. If your Massage Tub only has a hydromassage system, use the air adjustment switch to adjust the air volume to the maximum (water and air are sprayed out after mixing through the nozzle); start the air massage system and the hydromassage system, and run for 10 minutes, if you The Massage Tub only has a hydromassage system, and the air volume is adjusted to a medium level with an air adjustment switch. In these 10 minutes, the massage water flow relieves the nerve tension on the skin surface, provides an effective way to soothe the muscle tissues, and accelerates the blood circulation in the body; finally, repeat step 2 for 3-5 minutes to increase the relaxation effect ; When all these processes are over, it is recommended to drink a glass of water at the same temperature as room temperature, rest in bed and stretch your body as much as possible. You can take 2 to 3 such baths a week.

Like it? Share it!


aihw

About the Author

aihw
Joined: June 6th, 2019
Articles Posted: 188

More by this author