Shower room customization

Posted by aihw on January 19th, 2021

How to customize the Shower room

1. Look at the thickness and weight of the glass

Relatively spacious shower space should also consider its thickness and load-bearing when choosing glass. Don't choose too thick. The glass area is too large and the weight will not be good. Generally, 8MM is enough.

2. Look at the hardware hinges and beams

When choosing a frameless shower room, hardware hinges and beams are the key. To be safe, choose a glass with a thickness of 10mm, which will be safer after filming. In fact, there are additional alloy beams on the top of the fence, and the other ends of the beams are fixed on the walls on both sides, which is a lot safer and more stable.

3. Look at the style

For example, the corner shower room is suitable for the smaller bathroom space. It is convenient to choose this kind of shower room and saves space. However, the slideway should be cleaned frequently so that the sliding door will move more smoothly.

4. Pay attention to details

Be sure to pay attention to the details when purchasing, try all the hinges, sealing strips, slide rails, and handles. Pay attention to the details of the product. In addition to other key considerations, the sealing strips at the junction of glass and glass and glass and wall are also Very important. Good quality shower room sealing strips should not have break points at the hinges, and the sealing strips between the glass doors should be magnetic, so that the water-retaining performance will be better.

5. Look at the material and certificate

You can carefully observe whether there are sand holes, scratches, etc. on the surface of the aluminum alloy material; whether the tempered glass is transparent, whether there are blisters, knots, etc.; hardware accessories include handles, pull rods, pulleys and bases, etc., and the plating layer on the surface is also High smoothness, no blistering and anti-corrosion is better; in the production process, focus on the seam of aluminum and tempered glass, the fit and tightness of the tempered glass door and waterproof glue, and the material and wheel seat of the guide pulley According to industry insiders, the hardness of qualified shower room aluminum must be at least 12 degrees, and the thickness must be at least 1.2mm. The glass aluminum must be above 1.5mm when hanging on the rails. You can usually press the aluminum by hand. The frame is used to test the hardness of the aluminum material. You can also do pull-ups on the aluminum material in the shower room to test the strength of the aluminum material and the overall firmness of the shower room. It can focus on checking whether there are 3C certification marks, product quality inspection certificates and patent certificates on the original tempered glass, among which 3C certification is the abbreviation of China Compulsory Product Certification.

6. Look at pulleys and levers

If you buy a shower room with a sliding door, you can test whether the pulley is smooth when pulled, whether the pulley and the aluminum track are tightly matched, whether it is easy to fall off when impacted by external forces, etc., whether water vapor is easy to enter the wheels, etc.; secondly, the shower room It is recommended that the tie rods should be selected with strong stability, such as loop tie rods, straight tie rods, and diagonal tie rods.

Like it? Share it!


aihw

About the Author

aihw
Joined: June 6th, 2019
Articles Posted: 188

More by this author