Precautions for using China VI engines

Posted by bruce zhu on January 19th, 2021

With the gradual improvement of environmental protection requirements, SINOTRUK is also facing a replacement. Now, in most suburban areas, only the National VI SINOTRUK engine supports licensing. With the launch of the National VI vehicles, many drivers began to start the engines. Today I want to tell you some things pilots should pay attention to when using the National VI engine.

When you start the howo truck engine for the first time, pay attention to check whether the engine has any starting obstacles or non-smooth places. If there is even a small problem, it should not be left alone. You need to contact the local service center for maintenance in time. Contact the manufacturer for handling returns and exchanges. The motor should be cleaned regularly, but you should pay attention to this when cleaning. The engine is covered with various wire harnesses and electronic components. Since liquids such as water can easily damage electronic components, choose to wipe it with a soft, dry cloth when cleaning the motor. Or use dry compressed air to blow off. Do not use water or other liquids for cleaning to avoid damaging the motor. Because diesel contains a certain amount of moisture, and this moisture will adversely affect various parts of the engine, for example, it can cause the injector to issue a card, dilute the oil and cause lava, resulting in excessive emissions and engine damage, so the diesel filter Moisture in diesel is filtered out, but the filtered moisture will be stored under the fuel filter, so drivers need to drain the diesel filter daily to avoid excessive water accumulation and cause malfunctions.

There is no shortage of former drivers in the SINOTRUK truck circle. You can say you know how to handle HOWO truck parts. Sometimes when you see a problem with a replacement part, you can't help but fix it yourself. However, the author recommends that you do not do this, especially if it is within the warranty period, because if there is a failure due to your own disassembly or adjustment of the product, the manufacturer will not guarantee or guarantee it. will not return, so you will have to bear the loss. Users are recommended not to scratch their hands and not to modify, disassemble or adjust the product privately, otherwise it may damage the product and not work normally.