Flash Dryer Manufacturers in India

Posted by Ritesh Mahajan on January 20th, 2021

The material can dry in less than a second, hence the word "Flash Dryer" The material can be dried even at elevated inlet air temperatures without degradation. Here is the Flash Dryer Manufacturers in India Hot air is mixed intensively with the input material through the ID Fan to dry the same and low-temperature moisture-laden air is depleted. Flash dryers are used to dry moist cakes/pastes that are not pumpable.

The clean thermal medium heated by the heat source reaches the drying chamber in a tangential form, forming a deep vortex with the swirling airflow mechanical agitation system. The wet material is metered into the drying chamber through a feeder, pulverized, and dried by stirring and vortex flow.

On top of the drying chamber, a particle-sized classifier is located. The fine powder that meets the drying requirements is discharged from the top of the tower, and the latter separator collects it. The larger particles that do not follow the drying requirements are blocked and the classifier starts pulverizing and drying them. The activated draft fan empties the clean exhaust gas.

The clean thermal medium heated by the heat source reaches the drying chamber in a tangential form, forming a deep vortex with the swirling airflow mechanical agitation system. The wet material is metered into the drying chamber through a feeder, pulverized, and dried by stirring and vortex flow. On top of the drying chamber, a particle-sized classifier is located.

Flash dryers are also called pneumatic dryers. Flash dryers are used for drying free-flowing powder or moisture-containing cakes. A typical flash dryer is made of a long tube or duct called the flash duct that is used to pass the product along with the hot air.

The substance is dried and then separated into a cyclone or bag filter as it moves in this flash duct.

Our flash dryer unit, an inexpensive solution for drying powders and granular materials, is designed for high humidity materials with a continuous drying zone and is capable of using higher gas temperatures compared to other forms of dryers, so the material retention time is very low. Dryening takes place in a matter of seconds.