Ribbon Blender Manufacturers in India

Posted by Ritesh Mahajan on January 20th, 2021

Basically, they consist of a trough-shaped shell with a semicircular bottom (usually 2 to 3 times longer than it is wide) fitted with a horizontal longitudinal shaft with arms supporting a variety of ribbon blades, paddles or helical screws placed at a relatively close clearance to the body of the semicircular mixer so that no material layer remains on the bottom of the ribbon mixer.

The most effective type of ribbon layout is the double spiral in which the outer ribbon drives the product in one direction, and the inner ribbon pulls it in the opposite direction.
The ribbons rotate and move materials both radially and laterally to ensure comprehensive blends in short cycle cycles. Ribbon agitato agitato is used for blends that are between 40 and 70% of the rated ribbon blender strength.

There should be reimbursement for the material from the upper hand. To charge the material as well as for the air vent, port/ports should be supplied on the top cover. One discharge valve was provided on the lower side of the center of the container.

The powder moves in the Ribbon Blender Manufacturers in India from the middle to the end of the container and from the end of the container to the center of the container. Therefore, the total mixing time requirement is very low and the RPM needed is also very small. The dry material receives enough continuous movement due to the form & movement of the ribbon and the shape of the container.

For the homogeneous mixing of two or more powder materials, ribbon blenders are primarily used, with no appropriate wet solutions or minimum solutions. Ribbon blenders are designed to combine, in a remarkably short time, a wide variety of materials of widely varying densities at a high mixing efficiency.

Horizontal tube body, double screw inside and outside between the special structure, efficient operation, high quality, low noise, long working life, simple installation, different functions. Made of stainless steel, with net and lips for guard. Using different screw structures, mixing quickly & thoroughly with different mixing requirements. In a body with a split washing pane.

Ribbon Blender Manufacturers/Suppliers in India (shreesaiequipments.in)