-
Gather all the Things You'll Need.
-
Choose a height for your sliding bolt. Measure and mark it in two places to ensure that the bolt is level.
-
Align the main body of the bolt with your pencil marks and mark the position of the screw holes.
-
Drill a shallow hole on each of your screw hole pencil marks. These pilot holes will make it easier to drill in the screws.
-
Change the drill bit to a screw head bit. Hold the main body of the bolt over your pilot holes and drill into position.
-
Hold the staple against the door frame, level with the bolt. Draw around it with your pencil. Now you need to chisel out a shallow recess for the bolt holder.
-
Make a series of deep cuts along your pencil outline.
-
Remove the wood.
-
Check the fit of the bolt holder in the recess. Mark the position of the screw holes.
-
Attach a narrow bit to the drill and drill some pilot holes, then fit a screw head bit and drill the staple into the recess.
- Web:http://www.degolhardware.com/70-41-Stainless-Steel-Door-Bolt-Lock-pd48974985.html