Guidelines for Cork Flooring Installation

Posted by articlelink01 on September 22nd, 2014

You should not start installing cork floors without enough information and knowledge of how it should be done. You might end up messing a lot when you do cork flooring installation from a point of ignorance. The following guideline should help you a lot in getting that accomplished in a hassle-free manner. It has the dos and don’ts that will help you navigate through the complicated installation process with ease. For cork floors, you are strongly advised against carrying out repairs once the old one is damaged.

The best thing to do is install a completely new floor over the existing one. It will be more convenient and cheaper as compared to repairing. Prior to the actual installation, the cork tiles must be kept inside the room for at least three days which helps them to acclimatize easily to the indoor environment. This will be the right time for you to carry out a thorough inspection of the tiles in making sure they are of the right size, color as well as note any flaws. With that basic information at your fingertips, you can embark on installing the floor by following this step-by-step guideline.

Begin the cork flooring installation by planning out the new floor that you are to install. You can take the actual measurements of the room and come up with a sketch on a piece of paper. That should be able to give you a rough idea of what is expected and how to go about the whole process. Come up with as many impressions as possible which will give you a pool of options to have a look at. After that, proceed to prepare the old floor in anticipation of the new flooring. You can sand the concrete to fill any gaping holes and cracks, clean it and ensure it is completely dry.

When the working space is ready, mark out the layout lines as captured in the sketch and apply adhesive appropriately. You can then lay down the tiles but after the adhesive has taken enough time to dry. Don’t rush over anything as patience pays. If the tiles are not fitting well, trim them using a jig but not too much of the material. The general idea is to have the corks fitting in well to the marked out areas. You can sand to fill out any holes left open and apply proper finishing product. This will be important for adhesive purposes thus it has to be the favorite.

Your cork flooring installation will be complete and ready to enjoy your new floor. If your rooms are big, you should complete one section at a time even though it might take a lot of time. You don’t have to rush into completing the whole room at a go then end up frustrated. It calls for precision and keenness to details for your cork floor to be installed flawlessly.

Resource Box
Cork Flooring Installation is systematic so you should follow one instruction at a time to the end. You will have yourself to blame if anything is overlooked because it will have negative results when installing a cork floor - .

Like it? Share it!


About the Author

Joined: March 6th, 2014
Articles Posted: 5,441

More by this author