Points to note in the maintenance of compound fertilizer equipment

Posted by npkproduction on January 25th, 2021

NPK fertilizer production equipment is simple and practical, and the produced fertilizer can be quickly absorbed by crops. In order to better use compound fertilizer production equipment, it is very important to maintain compound fertilizer production equipment. Let’s focus on NPK fertilizer production equipment. Maintenance points:

1.The shaft of npk fertilizer production line equipment bears the full load of the negative machine, so good lubrication has a great influence on the life of the bearing.

2. Lubricating oil directly affects the service life and operation rate of compound fertilizer production equipment. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good. The main oil injection point of this machine is the rotating bearing, roller bearing, all gear movable bearings and sliding planes.

3. The newly installed wheel tyres are prone to loosening and must be checked frequently.

4. compound fertilizer production equipment should pay attention to whether all parts of the machine are working properly.

5. Pay attention to check the degree of wear of the easily worn parts of the compound fertilizer production equipment, and pay attention to the replacement of worn parts at any time.　　

6.The bottom frame plane of the movable device of the compound fertilizer production equipment should be removed from dust and other debris, so as to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.

7. If the rotating gear in the production equipment of the compound fertilizer plant has an impact sound during operation, it should be stopped immediately for inspection and eliminated.