Gate Motors Pre Installation Advice: Five Tips

Posted by aimewolf on October 11th, 2014

Technology of the day is no where close to where it used to be a couple of decades ago. A mere look at technologies in automatic gates will spell out similar thoughts. Once strictly confined to the industries, gate motors are now extensively used domestic purposes as well. A major part of the credit goes to some ground breaking renovation in gate automation and related technologies.

Most modern gates that are being installed in homes have the best controllers in the business. Making use of the best in technology, these controllers come loaded with LCD displays right from the showroom. They are quite capable to power almost everything including modern alarm systems and swimming pools. This makes these motors greatly utile tools that can cut out significantly from daily hassles. It is however important to install them in a proper way. Here below are a few checks that need to be performed before installation.

The pull force

Checking the pull force is very important when dealing with automatic gates. Imperatively, one has to choose a motor that will move the gate effectively. It is important to choose a powerful motor to ensure this. If the gate motors are not powerful enough for a particular operation, the gearbox could break right at the time of operation. It is thus important to ensure that the pull force of the gate is enough to perform the respective task. This means that if there is a weight of ton that is to be pulled, a domestic motor might not suffice the need.

Weight of the gate

Another important consideration that one needs to be is the weight of the gate. While this might appear to be a repeat of the entry made above, scaling he gate’s weight ahs its value in itself. This also suggests that gate weight and the force required to pull are actually two different concepts that would require distinctive brooding. This would mean that even a heavy gate can be moved effortlessly if the rollers and wheels are in top shape and condition.

The equipment

Choice of the equipment is another important consideration that needs to be made in gate automation. Even before the motor is installed, it is advisable to reach finality on the ancillary equipment. It is through these equipment that provisions are made for junction boxes, cable routes etc. The ancillary equipment could refer to devices like infrared beams, intercoms or proximity card readers.

Frequency of operation

Most motors are powered by the mains supply in the house. There are others that are driven by batteries and are Ac units. Depending on the frequency with which the gate is to be closed or opened, it is important to choose the right electricity supply of the house.

Need for battery backup

If the motor is to be powered by the mains, it would be a wise idea to have battery backup ready for alternative power. Most companies that make extensive use of gate motors also see to it that they have proper power backup for the motors. For domestic purposes, the use of such a motor is optional.

In the hunt for Gate Motors? Find the best in Gate Automation with our services.