Amount Of Risk Lint Causes To Your Dryer

Posted by elain martell on January 28th, 2021

Are you aware of the fact that your dryer might catch fire or burn up by extreme overheat? Before you face this unfortunate situation be cautious and keep your dryer risk-free.

The lint inside the dryer can cause overheating which later leads to fire. However, the motor can also cause a fire. If the dryer caught fire call services. There is dryer repair in Los Angeles. 

What Is Lint? 

Lint is bundled of extremely short fibers that are separated from the surface of clothes. During the wash, the specks of dirt lift away with the help of moisture but that also causes the loss of some fibers. Those fibers get released in the drying process in a dryer. This is how lint buildup in the dryer vent. 

How Lint Build Up 

• If you keep your dryer too close to the wall that can decrease the air to pass around crush the dryer vents.
• If the dryer vent is long and curved. Curved and long vents are prone to produce extra lint. It is wiser to get a vent that is as lean and small as possible.
• Duct extenders that are made of plastic or foil. These are easily crushed materials that may cause buildup and blockage.
• If you overload the dryer with wet clothes while drying.

The Signs Of Lint’s Accumulation 

• A burning smell coming from the dryer when you started using it.
• The clothes are taking a long time to dry off.
• If the dryer is getting hot. 
• If there is no air coming out of the port while the dryer is on.

Fix or clean the dryer immediately if any of these things occur. 

Eliminate The Lint By Cleaning  

Clean the lint trap regularly so that it cannot build much lint. Scrape all the lint from the dryer vent, use a vacuum if needed. You can open the vent and do all of these cleaning tasks. You may also need to brush it with a duct brush. Replace the filter after it is cleaned. Don’t forget to turn the dryer on for few minutes so that it will blow away the extra lint if there is any.