Tips to Avoid Embroidery Threads from Breaking

Posted by Daniel Kate on January 28th, 2021

Every company has a certain process to succeed on the market. It needs a team that is well-experienced in their fields to run the company smoothly. The Embroidery Digitalizing Industry is no different. You need to have a clear understanding of the ins and outs of the industry.

If you are a beginner or an accomplished quilter, it is difficult to prevent problems. In this post, we are going to talk about the most popular problem of thread break machine embroidery.

As a beginner, the thread break issue will make you scream and shout, "Why do you keep breaking every time? "The problem is frustrating and exhausting even for an experienced sewer. Look at the thread break problems and suggestions to stop them.

If your thread breaks free, you need to verify that it is correctly mounted on the embroidery machine. It is a common issue that you may sometimes experience. It is imperative to get acquainted with each part of the machine. Another issue you can face in a thread machine for embroidery is the needle problem. The needle should be positioned correctly. To position the needle correctly, tighten the needle camp and make sure the flat side is away from you.

Examine the thread spool. It should be properly mounted in the sewing machine. You may also check the spool cap with the spool. The scale of the spool cap should be matched with the spool. It should not be too small or too big to split the top thread.

In the bobbin case, make sure to wind the thread evenly. It might be tedious to wound the thread, but it is worth it, as it saves time. This will keep the upper thread from splitting. The pitches are another element that can sever the thread of the embroidery. If the pitches are set to zero, you can break the thread. So, delete all stitches that are set to zero.

You need to check the tension in the thread of the embroidery. The stress in the thread should not be tight. If the tension is too tight, the thread will not work properly, and it will break. In general, the higher the number of dials, the tighter the tension or pull the thread.

Another problem for thread embroidery is the tension between the two sides of the thread. The tension of the upper and lower threads of the needle should be balanced to create fine stitches. You can change the line to that, depending on the computer.

Embroidery Thread Tips to Save Your Time

Make sure the direction to the embroidery thread is direct. Any distraction on the route would result in a thread break. Using the right thread quality. The thickness of the thread depends on the type of thread embroidery machine.

Always use the right needle to make high quality stitches on your fabric. Use a thinner needle for light fabric and a thicker needle for thick fabric as a thumb role.

Make sure to use the best coil and case for the finest quilting. Switch your computer and shake it with firm hands to remove the bits of debris that are trapped in the bobbin case.

Need Help? We are Here!

Here are some of the big problems with thread embroidery and tips to prevent thread breaks. Stick to these tips and you will be able to fix the issues quickly and keep your embroidery process running smoothly. In any case, if you need assistance, we are here for you. Our business provides high-quality online digitizing services at competitive rates. So, do not hesitate to take advantage of our facilities.