Gate motors for commercial use

Posted by SharonEvans on October 20th, 2014

If you want to install gates to a commercial property, you have to focus on a few things that can compromise your project. Every unit you will find on the market will have a few specifications and you have to take the time to read all of them before you will make up your mind. Commercial gates are not the same as residential ones.

The size of the commercial gates is usually much larger. This happens because a commercial property will have to open its gates to large vehicles as well and they will need to fit through the space. The length of the gates is one of the first factors you must consider when you pick your gate motors since each handles a different length.

If the gates are very long, they are also very heavy. Swinging gates that are very large will need gate motors that can operate them properly. If you buy a small motor for their operation and the gates are much heavier, they will not be moved and you will destroy the motor. This is why you have to make the right choice from the start.

One of the other issues you will need to consider is how wide the gates will be opened. Even if most people think that 90 degrees is enough, you have to think of the operation of the large vehicles that come through there. If you want to leave enough space for them, you should choose the gate automation system that opens the gates wider.

Wind is also an important issue you have to consider. If you have a gate that weighs close to a ton and the wind start blowing and it starts to move, it will be very hard to stop before it will damage something. This is why you have to focus on the gate automation system that will lock the gates when they are closed and open as well.

The time and effort that will go into its installation is also a factor you will need to consider. Since you do not want to waste too much time and since you want the gate automation to be fully operational in the shortest time possible, you have to find a unit that will be very easy to install to the system that is already in place.

It is not easy to find gate motors that are suited for commercial use and this is why you have to take all the time you need to explore your options and to pick the one that meets your demands. There may be quite a few sources you can use for this, but not all of them will deliver the answers you seek. If you want to learn all the details you are interested in about each motor you can fit to your gates, you should visit trade-electric-gateuk.com for it.

Installing gates on a commercial property is much harder than for residential use since the demands are much higher as well. Gate automation systems will need to comply with much stricter rules and you have to invest all the time you need to find the equipment that meets your demands. The site named before can deliver a wide range of gate motors you can use on any commercial gate system.